Juntian JKF5040XGC Engineering works vehicle (#244)

Manufacturer Profile

Additional Information

Optional side door, side window; top compartment closed, not open. The car inside and outside surfaces are made of 1.5mm aluminum container board production, with internal 50 * 50 square tube to strengthen the beams, the middle with polyurethane foam padding, fixing ring goods are installed in strengthening the beam, the floor of the trunk 3mm thick steel pull pattern to prevent slipping, left and right side rails are made of thick steel rolled into contraband Q235/4mm type, cross-sectional dimensions of 70mm * 30mm, the front fence at the rear of the cab vertical plane 100mm, vertical rear end of the front tires away plane is 235mm, the lower part of the left and right sides of the fence height from the ground is 300mm, bar spacing is 160mm, the vertical rod spacing of 750mm, using two 8 channel guardrail and the car will be around the bottom beam welding as a whole, two-channel connection spacing of 500mm, around the outside of the fence from the trunk laterally inward 30mm, 4 rear fence of thick steel plate bent into a [shaped section size 220mm * 50mm, 8 channel using two rear fence (see left side and bottom of the QI010 mounting guard schematic transverse horizontal) is integral with the frame bolt, the ends of the fence from the rear axle wheels of the vehicle from the outer end of the inwardly shifted by 50mm, rearwardly projecting longitudinal body 60mm, height above the ground plane is 400mm . Left and right side and rear reflective logo are continuous Paste. Working with optional internal generators.