En
Cn
RuYuwei YW5140ZLJ Dump garbage truck (#240)
Yuwei dump garbage truck YW5140ZLJ (batch #240) based on DFL1140B1 chassis is made in China by Xiamen Engineering Group Co., Ltd. The company is located in Xiamen, in Fujian Province, China.
YW5140ZLJ
Overview
| Model | YW5140ZLJ |
| Brand Name | Yuwei |
| Bulletin | #240 |
| Type of vehicle | Dump garbage truck |
| Country of origin | China |
| Chassis | DFL1140B1 |
Manufacturer Profile
| Manufacturer | Xiamen Engineering Group Co., Ltd. |
| Brands | |
| Type of manufacturer | Automobile manufacturer |
| City | Xiamen |
| Province (Region) | Fujian Province |
| Country | China |
| Number of vehicles* | 51 models (146 items total) |
| * A number of models manufactured by Xiamen Engineering Group Co., Ltd. found in Auto-che.com vehicle database | |
XGMATechnical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | ISDe18030 ISDe18530 ISDe21030 B19033 EQH180-33 YC6J180-33 YC6J200-33 | 4500 6700 6700 5900 4752 6494 6494 cc | 132 136 155 140 132 132 147 kW | ||||
| Performance | ||||
|---|---|---|---|---|
| Environmental standard | National III / Euro 3 | |||
| Maximum speed | 85 km/h | 53 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 7600 kg | 7.6 t | 16,800 lbs | |
| Gross vehicle weight rating | 14005 kg | 14 t | 30,876 lbs | |
| Axle load distribution | 5245 kg / 8760 kg 5.2 t / 8.8 t 11,563 lbs / 19,312 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 6850 mm | 22′6″ | ||
| Overall width | 2500 mm | 8′3″ | ||
| Overall height | 2980 mm | 9′10″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 3800 mm | 12′6″ | ||
| Front overhang | 1430 mm | 4′9″ | ||
| Rear overhang | 1620 mm | 5′4″ | ||
| Angle of approach | 20° | |||
| Angle of departure | 21.8° | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
The car should be pasted reflective logo on the side and rear.Side and rear protective device materials are hot-rolled steel Q235-A; are connected with the frame bolts; protection section dimensions of 110 × 50mm, high off the ground 540mm.