AUTO-CHE

Wanshan WS5510TZJ80 Drilling rig vehicle (#257)

Wanshan drilling rig vehicle WS5510TZJ80 (batch #257) based on WS5545 chassis is made in China by Hubei Sanjiang Space Wanshan Special Vehicle Co., Ltd. The company is located in Yichang, in Hubei Province, China.

Wanshan WS5510TZJ80 drilling rig vehicle

WS5510TZJ80

Wanshan WS5510TZJ80 drilling rig vehicle Wanshan WS5510TZJ80 drilling rig vehicle Wanshan WS5510TZJ80 drilling rig vehicle
Overview
ModelWS5510TZJ80
Brand NameWanshan
Bulletin#257
Type of vehicleDrilling rig vehicle
VIN
  • LWSFS12H×××××××××
Country of originChina
ChassisWS5545
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerVehicle manufacturer
CityYichang
Province (Region)Hubei Province
CountryChina
Number of vehicles*49 models
(71 items total)
* A number of models manufactured by Hubei Sanjiang Space Wanshan Special Vehicle Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WD615.3389726 cc9.7 L594 cu in276 kW376 hpHangzhou Car Engine Plant
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed70 km/h44 mph
ABSnone
Weights and Ground pressure
Curb weight50870 kg50.9 t112,149 lbs
Gross vehicle weight rating51000 kg51 t112,000 lbs
Axle load distribution9000 kg / 9000 kg / 33000 kg  (tridem axle)
9 t / 9 t / 33 t  (tridem axle)
20,000 lbs / 20,000 lbs / 73,000 lbs  (tridem axle)
Dimensions
Overall length14055 mm46′2″
Overall width2850 mm9′5″
Overall height4300 mm14′2″
Undercarriage and Suspension
Number of axles5
Wheelbase1400+3500+1350+1350 mm
4′8″+11′6″+4′6″+4′6″
Front track2390 mm7′11″
Rear track2050 mm6′9″
Front overhang2315 mm7′8″
Rear overhang1750 mm5′9″
Angle of approach22°
Angle of departure15°
Leaf springs8 / 8
Tyres and Wheels
Number of tyres16
Tyres dimension front 两轴:445/65R22.5 rear tridem axle :12R22.5
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

Reach volume / rear overhang 1550/840, the car was overrun, side protection after the protective material is made of Q235, side protection for bolted connections, after protection for welding, after protection section size of J120 × 60 × 5mm / steel 3.0mm, after the protective ground clearance is 396mm. The car just over four meters above the separable part of the platform and the clamp-shackle holding device, the two parts are connected with bolts on the mast, can be transported at state removed.