AUTO-CHE

Tuoshan WFG5250XYK Wing van truck (#231)

Tuoshan wing van truck WFG5250XYK (batch #231) based on LZ1250RCST chassis is made in China by Weifang Baoli Automobile Co., Ltd. The company is located in Weifang, in Shandong Province, China.

Tuoshan WFG5250XYK wing van truck

WFG5250XYK

Overview
ModelWFG5250XYK
Brand NameTuoshan
Bulletin#231
Type of vehicleWing van truck
Country of originChina
ChassisLZ1250RCST
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityWeifang
Province (Region)Shandong Province
CountryChina
Number of vehicles*71 models
(208 items total)
* A number of models manufactured by Weifang Baoli Automobile Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YC6J220-33 / B210336494 / 5900 cc162 / 155 kW
Performance
Maximum speed90 km/h56 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.35
Weights and Ground pressure
Curb weight10605 kg10.6 t23,380 lbs
Gross vehicle weight rating25000 kg25 t55,000 lbs
Axle load distribution6880 kg / 6880 kg / 11240 kg,
6750 kg / 6750 kg / 11500 kg
6.9 t / 6.9 t / 11.2 t,
6.8 t / 6.8 t / 11.5 t
15,168 lbs / 15,168 lbs / 24,780 lbs,
14,881 lbs / 14,881 lbs / 25,400 lbs
Dimensions
Overall length11995 mm39′5″
Overall width2550 mm8′5″
Overall height4000 mm13′2″
Cargo body
Cargo body length9500 mm31′3″
Cargo body width2400 mm7′11″
Cargo body height2500 mm8′3″
Undercarriage and Suspension
Number of axles3
Wheelbase1800+5600 mm,
1860+5440 mm
5′11″+18′5″,
6′2″+17′11″
Front/rear overhang1445 mm / 3150 mm,
1328 mm / 3267 mm,
1445 mm / 3250 mm,
1328 mm / 3367 mm
4′9″ / 10′5″,
4′5″ / 10′9″,
4′9″ / 10′8″,
4′5″ / 11′1″
Approach / departure angle27 / 11, 28 / 11, 27 / 12 deg.
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

Top compartment sealed, not open.Optional cab and chassis according cover. Wheelbase, front / rear overhang, approach / departure angle corresponds with the optional chassis. When wheelbase 1800 +5600, the former corresponding / rear overhang is: 1445/3150 and 1328/3267, when the wheelbase 1860 +5440, the former corresponding / rear overhang is: 1445/3250 and 1328/3367. Side guards made of material used Q235, and the frame bolted; Material Material rear underrun protection device is Q235, bolted the frame for the channel cross-sectional shape, size 100mm × 50mm, the lower edge above ground is 400mm. When wheelbase 1860 +5440, rear overhang is 3367, corresponding axle load 6750/6750/11500.