AUTO-CHE

Tielong TB5250PB Flatbed truck (#228)

Tielong flatbed truck TB5250PB (batch #228) based on ZZ3251M3841C1 chassis is made in China by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. The company is located in Xiangfan, in Hubei Province, China.

Tielong TB5250PB flatbed truck

TB5250PB

Overview
ModelTB5250PB
Brand NameTielong
Bulletin#228
Type of vehicleFlatbed truck
Country of originChina
ChassisZZ3251M3841C1
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerSpecial purpose vehicle manufacturer
CityXiangfan
Province (Region)Hubei Province
CountryChina
Number of vehicles*72 models
(126 items total)
* A number of models manufactured by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WD615.93E WD615.93 WD615.92 WD615.92E WD615.92C WD615.93C WD615.97E WD615.97C9726 9726 9726 9726 9726 9726 9726 9726 cc213 213 196 196 198 213 221 221 kW
Performance
Maximum speed75 km/h47 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.0
Weights and Ground pressure
Curb weight12370 kg12.4 t27,271 lbs
Gross vehicle weight rating24900 kg24.9 t54,900 lbs
Axle load distribution7000 kg / 17900 kg  (tandem axle)
7 t / 17.9 t  (tandem axle)
15,000 lbs / 39,500 lbs  (tandem axle)
Dimensions
Overall length9290 mm30′6″
Overall width2500 mm8′3″
Overall height3475 mm / 3075 mm11′5″ / 10′2″
Undercarriage and Suspension
Number of axles3
Wheelbase3750+1350 mm12′4″+4′6″
Front overhang1320 mm4′4″
Rear overhang2870 mm9′5″
Angle of approach20.5°
Angle of departure10.5°
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

Only objects used to transport non-removable, cargo flat ground clearance 1260mm. Lateral protective material is pressed into a groove plate Q235A, section size of 100mm × 60mm. And the sub-frame is bolted connections.The lower edge of the side protective ground clearance of 490mm. After the protective material is pressed into a groove plate Q235A, section size of 150mm × 60mm. Connection with the carriage frame is welded connections. The lower edge of the side protective ground clearance of 515mm.