AUTO-CHE

Tielong TB3251ZZ Dump truck (#225)

Tielong dump truck TB3251ZZ (batch #225) based on ZZ3251M3841C1 chassis is made in China by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. The company is located in Xiangfan, in Hubei Province, China.

Tielong TB3251ZZ dump truck

TB3251ZZ

Overview
ModelTB3251ZZ
Brand NameTielong
Bulletin#225
Type of vehicleDump truck
Country of originChina
ChassisZZ3251M3841C1
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerSpecial purpose vehicle manufacturer
CityXiangfan
Province (Region)Hubei Province
CountryChina
Number of vehicles*72 models
(126 items total)
* A number of models manufactured by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WD615.93E WD615.93 WD615.92 WD615.92E WD615.92C WD615.93C WD615.97E WD615.97C9726 9726 9726 9726 9726 9726 9726 9726 cc213 213 196 196 198 213 221 221 kW
Performance
Maximum speed75 km/h47 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.02, 1.03, 1.05
Weights and Ground pressure
Curb weight12335 kg,
12265 kg,
12175 kg
12.3 t,
12.3 t,
12.2 t
27,194 lbs,
27,040 lbs,
26,841 lbs
Gross vehicle weight rating25000 kg25 t55,000 lbs
Axle load distribution7000 kg / 18000 kg  (tandem axle)
7 t / 18 t  (tandem axle)
15,000 lbs / 40,000 lbs  (tandem axle)
Dimensions
Overall length8720 mm / 8520 mm / 8320 mm28′8″ / 28′0″ / 27′4″
Overall width2490 mm8′3″
Overall height3320 mm10′11″
Cargo body
Cargo body length6200 mm / 6000 mm / 5800 mm20′5″ / 19′9″ / 19′1″
Cargo body width2300 mm7′7″
Cargo body height1070 mm / 1070 mm / 1070 mm3′7″ / 3′7″ / 3′7″
Undercarriage and Suspension
Number of axles3
Wheelbase3750+1350 mm12′4″+4′6″
Front/rear overhang1320 mm / 2300 mm,
1320 mm / 2100 mm,
1320 mm / 1900 mm
4′4″ / 7′7″,
4′4″ / 6′11″,
4′4″ / 6′3″
Angle of approach20.5°
Angle of departure30°
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

The length of the size and shape of the vehicle interior trunk length dimensions, trunk height dimension tailgate, rear overhang dimensions and total mass, curb weight correspondence. Compartment dump mode after dump.Side protection panels made of Q235A pressed into groove, and the sub-frame is bolted connections. The lower edge of the side protective ground clearance of 540mm. After the protective material is pressed into a groove plate Q235A, section size of 120mm × 60mm. Connection with the chassis frame is bolted. The lower edge of the protective ground clearance of 540mm.