AUTO-CHE

Tielong TB3250SX Dump truck (#224)

Tielong dump truck TB3250SX (batch #224) based on SX3255UN384 chassis is made in China by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. The company is located in Xiangfan, in Hubei Province, China.

Tielong TB3250SX dump truck

TB3250SX

Overview
ModelTB3250SX
Brand NameTielong
Bulletin#224
Type of vehicleDump truck
Country of originChina
ChassisSX3255UN384
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerSpecial purpose vehicle manufacturer
CityXiangfan
Province (Region)Hubei Province
CountryChina
Number of vehicles*72 models
(126 items total)
* A number of models manufactured by Xiangfan Nanche Special Purpose Vehicle Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WP10.270N WP10.300N WP10.270 WP10.290 WP10.270E32 WP10.290E32 WP10.310E329726 9726 9726 9726 9726 9726 9726 cc199 221 199 213 199 213 228 kW
Performance
Maximum speed90 km/h56 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.08, 1.04, 1.01
Weights and Ground pressure
Curb weight12000 kg,
12200 kg,
12400 kg
12 t,
12.2 t,
12.4 t
26,000 lbs,
26,900 lbs,
27,300 lbs
Gross vehicle weight rating25000 kg25 t55,000 lbs
Axle load distribution7000 kg / 18000 kg  (tandem axle)
7 t / 18 t  (tandem axle)
15,000 lbs / 40,000 lbs  (tandem axle)
Dimensions
Overall length8076 mm / 8326 mm / 8576 mm26′6″ / 27′4″ / 28′2″
Overall width2500 mm8′3″
Overall height3450 mm11′4″
Cargo body
Cargo body length5400 mm / 5600 mm / 5800 mm17′9″ / 18′5″ / 19′1″
Cargo body width2300 mm7′7″
Cargo body height1100 mm / 1100 mm / 1100 mm3′8″ / 3′8″ / 3′8″
Undercarriage and Suspension
Number of axles3
Wheelbase3800+1350 mm12′6″+4′6″
Front/rear overhang1576 mm / 1350 mm,
1576 mm / 1600 mm,
1576 mm / 1850 mm
5′3″ / 4′6″,
5′3″ / 5′3″,
5′3″ / 6′1″
Angle of approach28°
Angle of departure25°
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

The length of the size and shape of the vehicle interior trunk length dimensions, trunk height dimension tailgate, rear overhang dimensions and total mass, curb weight correspondence. Compartment dump mode after dump. Side protective material is pressed into a groove plate Q235A, section size of 100mm × 60mm. And the sub-frame is bolted connections. The lower edge of the side protective ground clearance of 540mm. After the protective material is pressed into a groove plate Q235A, section size of 120mm × 60mm. Connection with the chassis frame is bolted. The lower edge of the protective ground clearance of 540mm.