AUTO-CHE

Sitom Sitom STQ5162JSQ3 Truck mounted loader crane (#242)

Sitom truck mounted loader crane STQ5162JSQ3 (batch #242) based on STQ1162L14T6D3 chassis is made in China by Hubei Tri-Ring Special Vehicle Co., Ltd. The company is located in Shiyan, in Hubei Province, China.

Sitom STQ5162JSQ3 truck mounted loader crane

STQ5162JSQ3

Sitom logo Overview
ModelSTQ5162JSQ3
Brand NameSitom logoSitom
Bulletin#242
Type of vehicleTruck mounted loader crane
Country of originChina
ChassisSTQ1162L14T6D3
Manufacturer Profile
Manufacturer
 
Brands
Type of manufacturerSpecial purpose vehicle manufacturer
CityShiyan
Province (Region)Hubei Province
CountryChina
Number of vehicles*1480 models
(4367 items total)
* A number of models manufactured by Hubei Tri-Ring Special Vehicle Co., Ltd. found in Auto-che.com vehicle database
Sitom logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YC6J220-30 YC6J220-33 B190336500 6494 5900 cc162 162 140 kW
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed87 km/h55 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.05
Weights and Ground pressure
Curb weight10820 kg10.8 t23,854 lbs
Gross vehicle weight rating16005 kg16 t35,285 lbs
Axle load distribution3720 kg / 3720 kg / 8565 kg
3.7 t / 3.7 t / 8.6 t
8,201 lbs / 8,201 lbs / 18,883 lbs
Dimensions
Overall length10990 mm36′1″
Overall width2490 mm8′3″
Overall height3800 mm12′6″
Cargo body
Cargo body length7800 mm25′8″
Cargo body width2295 mm7′7″
Cargo body height800 mm2′8″
Undercarriage and Suspension
Number of axles3
Wheelbase1850+5050 mm,
1850+4600 mm,
2100+5050 mm
6′1″+16′7″,
6′1″+15′2″,
6′11″+16′7″
Front/rear overhang1460 mm / 2630 mm,
1460 mm / 2380 mm
4′10″ / 8′8″,
4′10″ / 7′10″
Approach / departure angle25 / 15, 25 / 18 deg.
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

With the optional chassis cab, optional topping the same type of truck-mounted crane cab model QYS-6.3 Ⅲ, the quality of 3000kg, 6300kg maximum lifting load of fence material Material: Q235; Connection: bolt connection; After the protective section size: 50mm × 100mm; protective ground clearance:.. 500mm with optional front chassis Wai, side panels, front bumper (including front fog lights) and door cover with optional chassis driving the same type of high top . room only choice wheelbase chassis 1850 +5050,2100 +5050 correspondence between parameters (wheelbase / rear overhang / departure angle): a .1850 +5050/2630/15; two .2100 +5050/2380/18 .