AUTO-CHE

Sitom Sitom STQ3126L8Y43 Dump truck (#225)

Sitom dump truck STQ3126L8Y43 (batch #225) based on STQ1126L8Y43 chassis is made in China by Hubei Tri-Ring Special Vehicle Co., Ltd. The company is located in Shiyan, in Hubei Province, China.

Sitom STQ3126L8Y43 dump truck

STQ3126L8Y43

Sitom logo Overview
ModelSTQ3126L8Y43
Brand NameSitom logoSitom
Bulletin#225
Type of vehicleDump truck
Country of originChina
ChassisSTQ1126L8Y43
Manufacturer Profile
Manufacturer
 
Brands
Type of manufacturerSpecial purpose vehicle manufacturer
CityShiyan
Province (Region)Hubei Province
CountryChina
Number of vehicles*1480 models
(4367 items total)
* A number of models manufactured by Hubei Tri-Ring Special Vehicle Co., Ltd. found in Auto-che.com vehicle database
Sitom logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YC6J220-33 / YC6J200-336494 / 6494 cc162 / 147 kW
Performance
Maximum speed90 km/h56 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)0.76
Weights and Ground pressure
Curb weight6805 kg6.8 t15,002 lbs
Gross vehicle weight rating11990 kg12 t26,433 lbs
Axle load distribution3520 kg / 8470 kg
3.5 t / 8.5 t
7,760 lbs / 18,673 lbs
Dimensions
Overall length8000 mm / 7950 mm / 7840 mm / 7650 mm26′3″ / 26′1″ / 25′9″ / 25′2″
Overall width2490 mm8′3″
Overall height2990 mm9′10″
Cargo body
Cargo body length5600 mm / 5500 mm / 5400 mm / 5200 mm18′5″ / 18′1″ / 17′9″ / 17′1″
Cargo body width2300 mm7′7″
Cargo body height800 mm2′8″
Undercarriage and Suspension
Number of axles2
Wheelbase4700 mm,
4500 mm
15′6″,
14′10″
Front/rear overhang1490 mm / 1810 mm,
1490 mm / 1760 mm,
1490 mm / 1850 mm,
1490 mm / 1660 mm
4′11″ / 6′0″,
4′11″ / 5′10″,
4′11″ / 6′1″,
4′11″ / 5′6″
Approach / departure angle25 / 13, 25 / 14, 25 / 15 deg.
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

Container after unloading dump mode with optional chassis wheelbase, the correspondence between the parameters (dimensions (length) / cargo box length / wheelbase / rear overhang / departure angle): a .8000/5600/4700/1810 / 13; two .7950/5500/4700/1760/14; three .7840/5400/4500/1850/13; Fourth .7650/5200/4500/1660/15 mass change was less than 3%, so that only one set of quality The parameter fence material Material: Q235; Connection: Connection to the side rails welded to the rails bolted connections; protection section size: 50mm × 100mm; protective ground clearance: 460mm.