Qingling Isuzu Qingling Isuzu QL5080XZMARZJ Van truck (#250)

Qingling Isuzu van truck QL5080XZMARZJ (batch #250) based on QL1080ZMARZY chassis is made in China by Qingling Motors (Group) Co., Ltd. The company is located in Zhongqing, in Chongqing Municipality, China.

Qingling Isuzu QL5080XZMARZJ van truck


Qingling Isuzu QL5080XZMARZJ van truck Qingling Isuzu QL5080XZMARZJ van truck Qingling Isuzu QL5080XZMARZJ van truck Qingling Isuzu QL5080XZMARZJ van truck
Qingling Isuzu logo Overview
Brand NameQingling Isuzu logoQingling Isuzu
Type of vehicleVan truck
  • LWLDARZK×××××××××
Country of originChina
Manufacturer Profile
Type of manufacturerAutomobile manufacturer
Province (Region)Chongqing Municipality
Number of vehicles*128 models
(944 items total)
* A number of models manufactured by Qingling Motors (Group) Co., Ltd. found in vehicle database
Qingling Isuzu logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
14HK1-TCN25193 cc5.2 L317 cu in110 kW150 hpIsuzu Qingling (Chongqing) Engine Co., Ltd.
Fueldiesel fuel
Environmental standardNational II / Euro 2
Maximum speed110 km/h69 mph
Rated load capacity3300 kg3.3 t7,300 lbs
Load factor (the ratio of the payload of a vehicle to its weight)0.77
Weights and Ground pressure
Curb weight4510 kg4.5 t9,943 lbs
Gross vehicle weight rating8005 kg8 t17,648 lbs
Axle load distribution2690 kg / 5315 kg
2.7 t / 5.3 t
5,930 lbs / 11,718 lbs
Overall length8155 mm26′10″
Overall width2396 mm / 2346 mm7′11″ / 7′9″
Overall height3350 mm11′0″
Cargo body
Cargo body length6212 mm20′5″
Cargo body width2203 mm7′3″
Cargo body height2250 mm7′5″
Undercarriage and Suspension
Number of axles2
Wheelbase4475 mm14′9″
Front track1680 mm5′7″
Rear track1650 mm5′5″
Front overhang1110 mm3′8″
Rear overhang2570 mm8′6″
Angle of approach20°
Angle of departure
Leaf springs8 / 10+6
Tyres and Wheels
Number of tyres6
Tyres dimension8.25-16, 8.25R16
Seating capacity3
Steering controlsteering wheel
Additional Information

1. The van can not open the top of the closure, without optional Wind deflector and not optional side door, side door when no optional vehicle width 2346mm; 2, side protective material: steel Q235, connections: bolts is connected to the carriage beams; after protective material: steel SAPH440 thickness 2.0mm, Connection: rear fender bracket is bolted to the frame rails to the trailing end, after the protective section size: 140 × 50 (mm), ground clearance: 480mm.