En
Cn
RuPengxiang Sintoon PXT5050TWG Dug out pipe dredge vehicle (#262)
Pengxiang Sintoon dug out pipe dredge vehicle PXT5050TWG (batch #262) based on JX1053TG24 chassis is made in China by Hunan Pengxiang Sintoon Motor Co., Ltd. The company is located in Liuyang, in Hunan Province, China.
PXT5050TWG
Overview
| Model | PXT5050TWG |
| Brand Name | Pengxiang Sintoon |
| Bulletin | #262 |
| Type of vehicle | Dug out pipe dredge vehicle |
| VIN |
|
| Country of origin | China |
| Chassis | JX1053TG24 |
Manufacturer Profile
| Manufacturer | Hunan Pengxiang Sintoon Motor Co., Ltd. |
| Hunan Pengxiang Xingtong Automobile Co., Ltd. | |
| Brand | |
| Type of manufacturer | Automobile manufacturer |
| City | Liuyang |
| Province (Region) | Hunan Province |
| Country | China |
| Number of vehicles* | 37 models (64 items total) |
| * A number of models manufactured by Hunan Pengxiang Sintoon Motor Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | JX4D24A4H | 2402 cc | 2.4 L | 147 cu in | 90 kW | 123 hp | Jiangling Motors Co., Ltd. (JMC) |
| Performance | ||||
|---|---|---|---|---|
| Fuel | diesel fuel | |||
| Environmental standard | National IV / Euro 4 | |||
| Maximum speed | 110 km/h | 69 mph | ||
| ABS | have | |||
| Capacity | ||||
|---|---|---|---|---|
| Passenger capacity (including driver) | 3 | |||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 5140 kg | 5.1 t | 11,332 lbs | |
| Gross vehicle weight rating | 5335 kg | 5.3 t | 11,762 lbs | |
| Axle load distribution | 2182 kg / 3153 kg 2.2 t / 3.2 t 4,810 lbs / 6,951 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 5995 mm | 19′9″ | ||
| Overall width | 1965 mm | 6′6″ | ||
| Overall height | 2540 mm | 8′4″ | ||
| Cargo body | ||||
|---|---|---|---|---|
| Cargo body length | 4260 mm | 14′0″ | ||
| Cargo body width | 1650 mm | 5′5″ | ||
| Cargo body height | 1840 mm | 6′1″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 3360 mm | 11′1″ | ||
| Front track | 1565 mm | 5′2″ | ||
| Rear track | 1508 mm | 5′0″ | ||
| Front overhang | 1125 mm | 3′9″ | ||
| Rear overhang | 1510 mm | 5′0″ | ||
| Angle of approach | 19° | |||
| Angle of departure | 17° | |||
| Leaf springs | 7 / 5+6 | |||
| Tyres and Wheels | ||||
|---|---|---|---|---|
| Number of tyres | 6 | |||
| Tyres dimension | 7.00R16LT 12PR | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
The car at the top of the trunk closed, not open. The car special device for WT95-60 Digging device type. The box provided on the vehicle chassis, cabinets hydraulic station, hydraulic winch, hydraulic telescopic boom, dumper dig and dig, etc., dumper used to clean out the drain blockage during loading, the rated load on the quality of 475kg. Side protection using cold-formed channel / Q345, bolted. After protection using cold-formed channel / 345, solder connection. After protection section height dimension 100mm, section width dimension 50mm. Lower edge above ground 470mm.