En
Cn
RuLingye NJ5250GJBC Concrete mixer truck (#240)
Lingye concrete mixer truck NJ5250GJBC (batch #240) based on NJ5250GJBC chassis is made in China by Nanjing Automobile Group Co., Ltd. The company is located in Nanjing, in Jiangsu Province, China.
NJ5250GJBC
Overview
| Model | NJ5250GJBC |
| Brand Name | Lingye |
| Bulletin | #240 |
| Type of vehicle | Concrete mixer truck |
| VIN |
|
| Country of origin | China |
| Chassis | NJ5250GJBC |
Manufacturer Profile
| Manufacturer | Nanjing Automobile Group Co., Ltd. |
| Brands | |
| Type of manufacturer | Automobile manufacturer |
| City | Nanjing |
| Province (Region) | Jiangsu Province |
| Country | China |
| Number of vehicles* | 3021 models (9239 items total) |
| * A number of models manufactured by Nanjing Automobile Group Co., Ltd. found in Auto-che.com vehicle database | |
Yuejin
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | WP10.336 | 9726 cc | 9.7 L | 594 cu in | 247 kW | 336 hp | |
| Performance | ||||
|---|---|---|---|---|
| Environmental standard | National III / Euro 3 | |||
| Maximum speed | 82 km/h | 51 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 13050 kg | 13.1 t | 28,770 lbs | |
| Gross vehicle weight rating | 25000 kg | 25 t | 55,000 lbs | |
| Axle load distribution | 7000 kg / 18000 kg (tandem axle) 7 t / 18 t (tandem axle) 15,000 lbs / 40,000 lbs (tandem axle) | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 8600 mm | 28′3″ | ||
| Overall width | 2495 mm | 8′3″ | ||
| Overall height | 3840 mm | 12′8″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 3 | |||
| Wheelbase | 3600+1350 mm | 11′10″+4′6″ | ||
| Front overhang | 1455 mm | 4′10″ | ||
| Rear overhang | 2195 mm | 7′3″ | ||
| Angle of approach | 20° | |||
| Angle of departure | 19° | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
The car should be installed in the rear reflective logo stirred tank capacity of 5.5 m3 side guards: Material steel Q235, connection mode: bolt connection; rear underrun protection device: Material steel Q235, connection mode: bolt connection, cross section dimension : Groove, section height 180mm, groove depth 90mm, the lower edge of ground clearance 500mm.