AUTO-CHE

Chenglong Chenglong LZ5280XXYPQEK Soft top box van truck (#230)

Chenglong soft top box van truck LZ5280XXYPQEK (batch #230) based on LZ3301QEKT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

Chenglong LZ5280XXYPQEK soft top box van truck

LZ5280XXYPQEK

Chenglong logo Overview
ModelLZ5280XXYPQEK
Brand NameChenglong logoChenglong
Bulletin#230
Type of vehicleSoft top box van truck
Country of originChina
ChassisLZ3301QEKT
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityLiuzhou
Province (Region)Guangxi Zhuang Autonomous Region
CountryChina
Number of vehicles*1539 models
(4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Chenglong logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WP10.300N WP10.336N YC6M290-30 YC6M340-31 WP10.340E32 WP12.336N WP10.3369726 9726 9839 9839 9726 11596 9726 cc221 247 215 250 250 247 247 kW
Performance
Maximum speed75 km/h47 mph
Capacity
Quasi-total mass of trailer9980 kg10 t22,002 lbs
Load factor (the ratio of the payload of a vehicle to its weight)1.19, 1.20, 1.21
Weights and Ground pressure
Curb weight12600 kg,
12550 kg,
12510 kg
12.6 t,
12.6 t,
12.5 t
27,800 lbs,
27,668 lbs,
27,580 lbs
Gross vehicle weight rating27630 kg27.6 t60,914 lbs
Axle load distribution5415 kg / 5615 kg / 16600 kg  (tandem axle) ,
5390 kg / 5590 kg / 16650 kg  (tandem axle) ,
5365 kg / 556 kg
5.4 t / 5.6 t / 16.6 t  (tandem axle) ,
5.4 t / 5.6 t / 16.7 t  (tandem axle) ,
5.4 t / 0.6 t
11,938 lbs / 12,379 lbs / 36,600 lbs  (tandem axle) ,
11,883 lbs / 12,324 lbs / 36,707 lbs  (tandem axle) ,
11,828 lbs / 1,226 lbs
Dimensions
Overall length11112 mm / 11012 mm / 10870 mm36′6″ / 36′2″ / 35′8″
Overall width2495 mm8′3″
Overall height3970 mm / 3800 mm / 3655 mm13′1″ / 12′6″ / 12′0″
Cargo body
Cargo body length8200 mm / 8000 mm / 7800 mm26′11″ / 26′3″ / 25′8″
Cargo body width2300 mm7′7″
Cargo body height2200 mm / 2000 mm / 1800 mm7′3″ / 6′7″ / 5′11″
Undercarriage and Suspension
Number of axles4
Wheelbase1800+4260+1350 mm,
1700+4360+1350 mm
5′11″+14′0″+4′6″,
5′7″+14′4″+4′6″
Front/rear overhang1512 mm / 2190 mm,
1512 mm / 2090 mm,
1512 mm / 1948 mm
5′0″ / 7′3″,
5′0″ / 6′11″,
5′0″ / 6′5″
Approach / departure angle25 / 16, 19 / 16, 25 / 18, 19 / 18, 25 / 21, 19 / 21 deg.
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

Optional high roof cab and under the bumper.Trunk floor to the top grid positions height 2500mm, 2200mm, 2100mm (corresponding to high container fence 2200mm, 2000mm, 1800mm), both sides of the carriages were nowhere. Elected high roof cab and under the bumper, the approach angle of 19; flat when mounted cab and no elected under the bumper, the approach angle of 25; box length 8200mm, its departure angle of 16, Box Length 8000mm, its departure angle of 18, box length is 7800mm, its departure angle is 21.Close to departure angle (degrees) can be as follows: 19/18, 25/21, 19/21. Side does not open the door.Protective Device Description: Material Material: Q235-A; Connection: bolt connection; main dimensions of the rear protective device: a cross-sectional dimensions (height X width) 100mmX40mm, ground clearance 530mm