AUTO-CHE

Chenglong Chenglong LZ5270XXYPQEH Soft top box van truck (#230)

Chenglong soft top box van truck LZ5270XXYPQEH (batch #230) based on LZ3301QEHT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

Chenglong LZ5270XXYPQEH soft top box van truck

LZ5270XXYPQEH

Chenglong logo Overview
ModelLZ5270XXYPQEH
Brand NameChenglong logoChenglong
Bulletin#230
Type of vehicleSoft top box van truck
Country of originChina
ChassisLZ3301QEHT
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityLiuzhou
Province (Region)Guangxi Zhuang Autonomous Region
CountryChina
Number of vehicles*1539 models
(4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Chenglong logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WP10.300N WP10.336N YC6M290-30 YC6M340-31 WD615.95E YC6M340-33 WP10.340E32 WP12.336N WP10.3369726 9726 9839 9839 9726 9839 9726 11596 9726 cc221 247 215 250 247 250 250 247 247 kW
Performance
Maximum speed75 km/h47 mph
Capacity
Quasi-total mass of trailer9980 kg10 t22,002 lbs
Load factor (the ratio of the payload of a vehicle to its weight)1.21, 1.22, 1.22
Weights and Ground pressure
Curb weight12460 kg,
12410 kg,
12370 kg
12.5 t,
12.4 t,
12.4 t
27,470 lbs,
27,359 lbs,
27,271 lbs
Gross vehicle weight rating27490 kg27.5 t60,605 lbs
Axle load distribution5355 kg / 5555 kg / 16580 kg  (tandem axle) ,
5370 kg / 5570 kg / 16550 kg  (tandem axle) ,
5395 kg / 559 kg
5.4 t / 5.6 t / 16.6 t  (tandem axle) ,
5.4 t / 5.6 t / 16.6 t  (tandem axle) ,
5.4 t / 0.6 t
11,806 lbs / 12,247 lbs / 36,553 lbs  (tandem axle) ,
11,839 lbs / 12,280 lbs / 36,486 lbs  (tandem axle) ,
11,894 lbs / 1,232 lbs
Dimensions
Overall length10642 mm / 10362 mm / 10162 mm34′11″ / 34′0″ / 33′5″
Overall width2495 mm8′3″
Overall height3980 mm / 3800 mm / 3655 mm13′1″ / 12′6″ / 12′0″
Cargo body
Cargo body length7600 mm / 7200 mm / 6800 mm25′0″ / 23′8″ / 22′4″
Cargo body width2300 mm7′7″
Cargo body height2200 mm / 2000 mm / 1800 mm7′3″ / 6′7″ / 5′11″
Undercarriage and Suspension
Number of axles4
Wheelbase1800+3900+1350 mm,
1700+4000+1350 mm
5′11″+12′10″+4′6″,
5′7″+13′2″+4′6″
Front/rear overhang1512 mm / 2080 mm,
1512 mm / 1800 mm,
1512 mm / 1600 mm
5′0″ / 6′10″,
5′0″ / 5′11″,
5′0″ / 5′3″
Approach / departure angle25 / 16, 19 / 16, 25 / 18, 19 / 18, 25 / 20, 19 / 20 deg.
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

Optional high roof cab and under the bumper.Trunk floor to the top grid positions height 2400mm, 2200mm, 2100mm (corresponding to high container fence 2200mm, 2000mm, 1800mm), both sides of the carriages were nowhere. Elected high roof cab and under the bumper, the approach angle of 19; flat when mounted cab and no elected under the bumper, the approach angle of 25; box length 7600mm, its departure angle of 16, Box Length 7200mm, its departure angle of 18, box length is 6800mm, its departure angle is 20, the rest of the parameters one by one.Close to departure angle (°) can be as follows: 19/18, 25/20, 19/20. Side does not open the door.Protective Device Description: Material Material: Q235-A; Connection: bolt connection; main dimensions of the rear protective device: a cross-sectional dimensions (height X width) 100mmX40mm, ground clearance 530mm.