AUTO-CHE

Chenglong Chenglong LZ3310PEH Dump truck (#237)

Chenglong dump truck LZ3310PEH (batch #237) based on LZ3310PEHT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

Chenglong LZ3310PEH dump truck

LZ3310PEH

Chenglong logo Overview
ModelLZ3310PEH
Brand NameChenglong logoChenglong
Bulletin#237
Type of vehicleDump truck
Country of originChina
ChassisLZ3310PEHT
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityLiuzhou
Province (Region)Guangxi Zhuang Autonomous Region
CountryChina
Number of vehicles*1539 models
(4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Chenglong logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YC6M290-339839 cc9.8 L601 cu in215 kW293 hp
Performance
Maximum speed75 km/h47 mph
Capacity
Quasi-total mass of trailer6100 kg6.1 t13,400 lbs
Load factor (the ratio of the payload of a vehicle to its weight)1.07, 1.08, 1.09
Weights and Ground pressure
Curb weight14920 kg,
14820 kg,
14780 kg
14.9 t,
14.8 t,
14.8 t
32,893 lbs,
32,672 lbs,
32,584 lbs
Gross vehicle weight rating30900 kg30.9 t68,100 lbs
Axle load distribution6530 kg / 6730 kg / 17640 kg  (tandem axle) ,
6550 kg / 6750 kg / 17600 kg  (tandem axle) ,
6570 kg / 6770 kg / 17560 kg  (tandem axle)
6.5 t / 6.7 t / 17.6 t  (tandem axle) ,
6.6 t / 6.8 t / 17.6 t  (tandem axle) ,
6.6 t / 6.8 t / 17.6 t  (tandem axle)
14,396 lbs / 14,837 lbs / 38,889 lbs  (tandem axle) ,
14,440 lbs / 14,881 lbs / 38,800 lbs  (tandem axle) ,
14,484 lbs / 14,925 lbs / 38,713 lbs  (tandem axle)
Dimensions
Overall length10695 mm / 10215 mm / 9965 mm35′2″ / 33′7″ / 32′9″
Overall width2495 mm8′3″
Overall height3600 mm11′10″
Cargo body
Cargo body length7600 mm / 6800 mm / 6000 mm25′0″ / 22′4″ / 19′9″
Cargo body width2300 mm7′7″
Cargo body height1100 mm3′8″
Undercarriage and Suspension
Number of axles4
Wheelbase1800+3900+1350 mm5′11″+12′10″+4′6″
Front/rear overhang1565 mm / 2080 mm,
1565 mm / 1600 mm,
1565 mm / 1350 mm
5′2″ / 6′10″,
5′2″ / 5′3″,
5′2″ / 4′6″
Approach / departure angle25 / 18, 21 / 18, 25 / 22, 21 / 22, 25 / 23, 21 / 23 deg.
Miscellaneous
Seating capacity2, 3
Steering controlsteering wheel
Additional Information

When the optional high roof cab and under the bumper when multiplied by the number of the cab for 2 people, which sets out the quality of the first three sets of data, when the cab number is 3, which sets out the quality of the three sets of data. When elected to hold the bumper, the approach angle of 21, when there is no elected mounted under the bumper, the approach angle of 25 car length is 7600, its departure angle of 18 car length is 6800, and its departure angle 22, 6000 car length, the departure angle is 23. Front / rear overhang / car length / length of the relationship is one to one relationship between, Compartment dump mode after dump. Side and rear underrun protection device: 1 Material Material:. Q235-A2 Connection: bolt connection 3 main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) from the in height: 530mm