Chenglong LZ3200PDL Dump truck (#230)

Chenglong dump truck LZ3200PDL (batch #230) based on LZ3200PDLT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

LZ3200PDL

Overview

Model	LZ3200PDL
Brand Name	Chenglong
Bulletin	#230
Type of vehicle	Dump truck
Country of origin	China
Chassis	LZ3200PDLT

Manufacturer Profile

Manufacturer	Dongfeng Liuzhou Automobile Co., Ltd.
	A subsidiary of DFM (Dongfeng Motor Corporation).
Brands	Chenglong, Dongfeng
Type of manufacturer	Automobile manufacturer
City	Liuzhou
Province (Region)	Guangxi Zhuang Autonomous Region
Country	China
Number of vehicles^*	1539 models (4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database

Technical specifications

#	Engine model	Engine displacement			Engine power		Engine manufacturer
1	WP10.300N / WP10.336N / YC6M290-30 / YC6M340-31 / YC6M290-33	9726 / 9726 / 9839 / 9839 / 9839 cc			221 / 247 / 215 / 250 / 215 kW

Performance
Maximum speed	75 km/h		47 mph

Capacity
Quasi-total mass of trailer	9980 kg	10 t		22,002 lbs
Load factor (the ratio of the payload of a vehicle to its weight)	1.001, 1.011, 1.011, 1.021, 1.021

Weights and Ground pressure
Curb weight	10000 kg, 9950 kg, 9950 kg, 9900 kg, 9900 kg	10 t, 10 t, 10 t, 9.9 t, 9.9 t	22,000 lbs, 21,936 lbs, 21,936 lbs, 21,800 lbs, 21,800 lbs
Gross vehicle weight rating	20010 kg	20 t	44,114 lbs
Axle load distribution	4760 kg / 15250 kg (tandem axle) , 4810 kg / 15200 kg (tandem axle) , 4810 kg / 15200 kg (并装双 4.8 t / 15.3 t (tandem axle) , 4.8 t / 15.2 t (tandem axle) , 4.8 t / 15.2 t (并装双 10,494 lbs / 33,620 lbs (tandem axle) , 10,604 lbs / 33,500 lbs (tandem axle) , 10,604 lbs / 33,500 lbs (并装双

Dimensions
Overall length	9982 mm / 9807 mm / 9807 mm / 9502 mm / 9372 mm / 10285 mm	32′9″ / 32′3″ / 32′3″ / 31′3″ / 30′9″ / 33′9″
Overall width	2495 mm	8′3″
Overall height	3580 mm	11′9″

Cargo body
Cargo body length	7200 mm / 7000 mm / 6800 mm / 6500 mm / 6300 mm / 7600 mm	23′8″ / 23′0″ / 22′4″ / 21′4″ / 20′9″ / 25′0″
Cargo body width	2300 mm	7′7″
Cargo body height	800 mm	2′8″

Undercarriage and Suspension
Number of axles	3
Wheelbase	4825+1350 mm, 4500+1350 mm	15′10″+4′6″, 14′10″+4′6″
Front/rear overhang	1560 mm / 2247 mm, 1560 mm / 2072 mm, 1560 mm / 2072 mm, 1560 mm / 2092 mm, 1560 mm / 1962 mm, 1560 mm / 2550 mm	5′2″ / 7′5″, 5′2″ / 6′10″, 5′2″ / 6′10″, 5′2″ / 6′11″, 5′2″ / 6′6″, 5′2″ / 8′5″
Approach / departure angle	25 / 19, 21 / 19, 25 / 21, 21 / 21, 25 / 22, 21 / 22, 25 / 17, 21 / 17 deg.

Miscellaneous
Seating capacity	2
Steering control	steering wheel

Additional Information

While the optional high roof cab fitted under the bumper. Compartment dump mode after dump.7200 wagon long time: front / rear overhang (mm): 1560/2247, Approach / departure angle: 25/19, with a lower bumper, Approach / departure angle: 21/19; trunk length 7000: Before Front / rear overhang (mm): 1560/2072, Approach / departure angle: 25/19, with a lower bumper, Approach / departure angle: 21/19; trunk length 6800 when: Front / rear overhang (mm ): 1560/2072 Approach / departure angle: 25/21, with a lower bumper, Approach / departure angle: 21/21; close to departure angle (°) can be as follows: 21/21, 25/22 , 21/22, 25/17, 21/17 front rear / rear overhang (mm) can be as follows: 1560/2092, 1560/1962. Added mass change caused by the length of the container changes within a range of 3%.7600 wagon long time: front / rear overhang (mm): 1560/2550, Approach / departure angle: 25/17, with a lower bumper, Approach / departure angle: 21/17; front suspension rear suspension also To (mm): 1560 / over 2550 relevant technical parameters of one relationship. Side and rear underrun protection device: 1 Material Material:. Q235-A 2 connections: bolted three main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) ground clearance: 530mm