AUTO-CHE

Chenglong Chenglong LZ3200PDJ Dump truck (#240)

Chenglong dump truck LZ3200PDJ (batch #240) based on LZ3200PDJT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

Chenglong LZ3200PDJ dump truck

LZ3200PDJ

Chenglong logo Overview
ModelLZ3200PDJ
Brand NameChenglong logoChenglong
Bulletin#240
Type of vehicleDump truck
Country of originChina
ChassisLZ3200PDJT
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityLiuzhou
Province (Region)Guangxi Zhuang Autonomous Region
CountryChina
Number of vehicles*1539 models
(4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Chenglong logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1WP10.300N / WP10.336N / YC6M290-30 / YC6M340-31 / WD615.93E / YC6M290-33 / YC6M340-339726 / 9726 / 9839 / 9839 / 9726 / 9839 / 9839 cc221 / 247 / 215 / 250 / 213 / 215 / 250 kW
Performance
Environmental standardNational II / Euro 2
Maximum speed75 km/h47 mph
Capacity
Quasi-total mass of trailer9980 kg10 t22,002 lbs
Load factor (the ratio of the payload of a vehicle to its weight)1.02, 1.03, 1.04
Weights and Ground pressure
Curb weight9850 kg,
9800 kg,
9750 kg
9.9 t,
9.8 t,
9.8 t
21,716 lbs,
21,600 lbs,
21,495 lbs
Gross vehicle weight rating19860 kg19.9 t43,784 lbs
Axle load distribution4780 kg / 15080 kg  (tandem axle) ,
4810 kg / 15050 kg  (tandem axle) ,
4830 kg / 15030 kg  (并装双
4.8 t / 15.1 t  (tandem axle) ,
4.8 t / 15.1 t  (tandem axle) ,
4.8 t / 15 t  (并装双
10,538 lbs / 33,246 lbs  (tandem axle) ,
10,604 lbs / 33,180 lbs  (tandem axle) ,
10,648 lbs / 33,135 lbs  (并装双
Dimensions
Overall length9007 mm / 8807 mm / 8705 mm / 8657 mm / 8759 mm / 8959 mm29′7″ / 28′11″ / 28′7″ / 28′5″ / 28′9″ / 29′5″
Overall width2495 mm8′3″
Overall height3580 mm11′9″
Cargo body
Cargo body length6000 mm / 5800 mm / 5600 mm19′9″ / 19′1″ / 18′5″
Cargo body width2300 mm7′7″
Cargo body height895 mm / 800 mm3′0″ / 2′8″
Undercarriage and Suspension
Number of axles3
Wheelbase4050+1350 mm,
4000+1450 mm
13′4″+4′6″,
13′2″+4′10″
Front/rear overhang1560 mm / 2047 mm,
1560 mm / 1847 mm,
1560 mm / 1745 mm,
1512 mm / 1997 mm,
1512 mm / 1797 mm,
1512 mm / 1695 mm
5′2″ / 6′9″,
5′2″ / 6′1″,
5′2″ / 5′9″,
5′0″ / 6′7″,
5′0″ / 5′11″,
5′0″ / 5′7″
Approach / departure angle25 / 22, 21 / 22, 25 / 24, 30 / 18, 30 / 17, 30 / 15 deg.
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

While the optional high roof cab fitted under the bumper, new optional visor, front mask (M5 cab), front bumper, optional hand-shaped. Compartment dump mode after dump.Minister / wheelbase / front and rear suspension / car length / Curb correspondence: 8705/4050 +1350/1560/1745 / 5600/9750, 8657/4000 +1450/1512/1695 / 5600/9750, 8807/4050 +1350 / 1560/1847/5800/9800, 8759/4000 +1450/1512/1797 / 5800/9800, 9007/4050 +1350/1560/2047 / 6000/9850, 8959/4000 +1450/1512/1997 / 6000/9850 . M4 corresponding to 1560mm front suspension cab, front suspension is 1512mm corresponding M5 cab. Side and rear underrun protection device: 1 Material Material:. Q235-A2 Connection: bolt connection 3 main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) from the in height: 530mm