AUTO-CHE

Chenglong Chenglong LZ3162PCD Dump truck (#237)

Chenglong dump truck LZ3162PCD (batch #237) based on LZ3162PCDT chassis is made in China by Dongfeng Liuzhou Automobile Co., Ltd. The company is located in Liuzhou, in Guangxi Zhuang Autonomous Region, China.

Chenglong LZ3162PCD dump truck

LZ3162PCD

Chenglong logo Overview
ModelLZ3162PCD
Brand NameChenglong logoChenglong
Bulletin#237
Type of vehicleDump truck
Country of originChina
ChassisLZ3162PCDT
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityLiuzhou
Province (Region)Guangxi Zhuang Autonomous Region
CountryChina
Number of vehicles*1539 models
(4104 items total)
* A number of models manufactured by Dongfeng Liuzhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Chenglong logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YC6A240-31 YC6A240-30 YC6A240-337255 7255 7255 cc177 177 177 kW
Performance
Maximum speed75 km/h47 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.01, 1.01, 1.00
Weights and Ground pressure
Curb weight7965 kg,
7990 kg,
8000 kg
8 t,
8 t,
8 t
17,560 lbs,
17,615 lbs,
18,000 lbs
Gross vehicle weight rating16020 kg16 t35,318 lbs
Axle load distribution3155 kg / 3155 kg / 9710 kg,
3145 kg / 3145 kg / 9730 kg,
3135 kg / 3135 kg / 9750 kg
3.2 t / 3.2 t / 9.7 t,
3.1 t / 3.1 t / 9.7 t,
3.1 t / 3.1 t / 9.8 t
6,956 lbs / 6,956 lbs / 21,407 lbs,
6,934 lbs / 6,934 lbs / 21,451 lbs,
6,911 lbs / 6,911 lbs / 21,495 lbs
Dimensions
Overall length8585 mm / 8785 mm / 9085 mm / 8652 mm / 8852 mm / 9152 mm28′2″ / 28′10″ / 29′10″ / 28′5″ / 29′1″ / 30′1″
Overall width2495 mm8′3″
Overall height3580 mm11′9″
Cargo body
Cargo body length6000 mm / 6200 mm / 6500 mm19′9″ / 20′5″ / 21′4″
Cargo body width2300 mm7′7″
Cargo body height800 mm2′8″
Undercarriage and Suspension
Number of axles3
Wheelbase1700+3600 mm,
1800+3500 mm,
1800+3800 mm
5′7″+11′10″,
5′11″+11′6″,
5′11″+12′6″
Front/rear overhang1445 mm / 1840 mm,
1445 mm / 2040 mm,
1512 mm / 1840 mm,
1512 mm / 2040 mm
4′9″ / 6′1″,
4′9″ / 6′9″,
5′0″ / 6′1″,
5′0″ / 6′9″
Approach / departure angle24 / 18, 24 / 17, 21 / 18, 25 / 17, 25 / 18 deg.
Miscellaneous
Seating capacity2, 3
Steering controlsteering wheel
Additional Information

Approach / departure angle (degrees) can be as follows: 21/17, 25/17, 25/18. Elected 6000 car long wheelbase 1700 +3500 +3600,1800 front / rear overhang 1445/1840, 1512/1840; elected 6200 car long wheelbase of 1700 +3600,1800 +3500, front suspension / rear overhang 1445/2040, 1512/2040; elected 6500 car long wheelbase 1800 +3800, front / rear overhang 1445/2040, 1512/2040. When the cab number is 2, which sets out the quality of the first three sets of data; When the cab number is 3, which sets out the quality of the three sets of data; currently suspended for the 1445 mounted under the bumper when no close angle of 24 mounted under the bumper, the approach angle is 21; currently suspended for the 1512, its approach angle is 25. After the suspension of 1840, the corresponding departure angle is 18, the rear overhang is 2040, corresponding to the departure angle is 17. Multiple related technical parameters for the rest of one relationship. Compartment dump mode after dump. Optional cab new mask, front bumper, front combination lamps, a variety of optional cab height. Side and rear underrun protection device: 1 Material Material:. Q235-A2 Connection: bolt connection 3 main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) from the in height: 530mm