AUTO-CHE

Jingma JMV5241CXY Stake truck (#233)

Jingma stake truck JMV5241CXY (batch #233) based on EQ5241XXYPJ chassis is made in China by Jiangxi Jiangling Group Jingma Motors Co., Ltd. The company is located in Nanchang, in Jiangxi Province, China.

Jingma JMV5241CXY stake truck

JMV5241CXY

Overview
ModelJMV5241CXY
Brand NameJingma
Bulletin#233
Type of vehicleStake truck
Country of originChina
ChassisEQ5241XXYPJ
Manufacturer Profile
Manufacturer
 A subsidiary of JMC (Jiangling Motors Corporation., Ltd.)
Brands
Type of manufacturerVehicle manufacturer
CityNanchang
Province (Region)Jiangxi Province
CountryChina
Number of vehicles*267 models
(501 items total)
* A number of models manufactured by Jiangxi Jiangling Group Jingma Motors Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1CA6DF3-26E3 / YC6J220-307127 / 6494 cc192 / 162 kW
Performance
Maximum speed80 km/h50 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.01
Weights and Ground pressure
Curb weight12120 kg12.1 t26,720 lbs
Gross vehicle weight rating24305 kg24.3 t53,583 lbs
Axle load distribution4585 kg / 4585 kg / 5050 kg / 10085 kg
4.6 t / 4.6 t / 5.1 t / 10.1 t
10,108 lbs / 10,108 lbs / 11,133 lbs / 22,234 lbs
Dimensions
Overall length12000 mm39′5″
Overall width2495 mm8′3″
Overall height3950 mm13′0″
Cargo body
Cargo body length9800 mm / 9600 mm32′2″ / 31′6″
Cargo body width2380 mm7′10″
Cargo body height600 mm / 800 mm2′0″ / 2′8″
Undercarriage and Suspension
Number of axles4
Wheelbase1860+3990+1400 mm,
1700+4320+1400 mm
6′2″+13′2″+4′8″,
5′7″+14′3″+4′8″
Front/rear overhang1250 mm / 3500 mm,
1250 mm / 3330 mm
4′2″ / 11′6″,
4′2″ / 11′0″
Approach / departure angle32 / 18, 32 / 19 deg.
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

1 compartment floor to the warehouse gate at the top height of 2400mm;. 2 different styles of optional cab front wall, lighting installation location, bumper cab optional .3 different styles of front wall, lighting installation location bumper.; 4 side and rear underrun protection device of the materials used are made of carbon steel Q235-A;. both sides of the protective device is soldered connection, the lower the guard is bolted connections; 5 sectional shape of rear underrun protection device is trough, section size is: section section width × height × section thickness (mm) 120 × 50 × 5, ground clearance is 530mm.