En
Cn
RuJuntian JKF5050XDY Power supply truck (#254)
Juntian power supply truck JKF5050XDY (batch #254) based on JX1051TPG24 chassis is made in China by Jiangxi Juntian Machinery Co., Ltd. The company is located in Fuzhou, in Jiangxi Province, China.
JKF5050XDY
Overview
| Model | JKF5050XDY |
| Brand Name | Juntian |
| Bulletin | #254 |
| Type of vehicle | Power supply truck |
| VIN |
|
| Country of origin | China |
| Chassis | JX1051TPG24 |
Manufacturer Profile
| Manufacturer | Jiangxi Juntian Machinery Co., Ltd. |
| Brand | |
| Type of manufacturer | Special purpose vehicle manufacturer |
| City | Fuzhou |
| Province (Region) | Jiangxi Province |
| Country | China |
| Number of vehicles* | 40 models (58 items total) |
| * A number of models manufactured by Jiangxi Juntian Machinery Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | JX493ZLQ4 | 2771 cc | 2.8 L | 170 cu in | 80 kW | 109 hp | Jiangling Motors Co., Ltd. (JMC) |
| Performance | ||||
|---|---|---|---|---|
| Fuel | diesel fuel | |||
| Environmental standard | National IV / Euro 4 | |||
| Maximum speed | 100 km/h | 63 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 4690 kg, | 4.7 t, | 10,340 lbs, | |
| Gross vehicle weight rating | 4820 kg | 4.8 t | 10,626 lbs | |
| Axle load distribution | 1675 kg / 3145 kg 1.7 t / 3.1 t 3,693 lbs / 6,934 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 5955 mm | 19′7″ | ||
| Overall width | 1880 mm | 6′3″ | ||
| Overall height | 2680 mm | 8′10″ | ||
| Cargo body | ||||
|---|---|---|---|---|
| Cargo body length | 3750 mm | 12′4″ | ||
| Cargo body width | 1735 mm | 5′9″ | ||
| Cargo body height | 1750 mm | 5′9″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 3360 mm | 11′1″ | ||
| Front track | 1385 mm | 4′7″ | ||
| Rear track | 1425 mm | 4′9″ | ||
| Front overhang | 1065 mm | 3′6″ | ||
| Rear overhang | 1440 mm | 4′9″ | ||
| Angle of approach | 27° | |||
| Angle of departure | 18.5° | |||
| Leaf springs | 7 / 4+5 | |||
| Tyres and Wheels | ||||
|---|---|---|---|---|
| Number of tyres | 6 | |||
| Tyres dimension | 7.00R16LT | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 2 | |||
| Steering control | steering wheel | |||
Additional Information
Left and right side of the fence are made of cold-rolled steel pull Q235,2MM roll bending forming, using two cross-sectional dimensions of 70MM, width 35MM, 135MM pitch profiles produced, the end from the cab rear 100mm, after the back-end from the front tire vertical 250mm, 100mm range in both ends of inwardly curved 30mm, both sides of the body from the outside inwards 70mm. Every side are made of two on the 5th edge angle with the side fence welded into a whole, and in the trunk pay fixed beam welding. The lower ground clearance 320MM, fence post production using the 10th channel, cross-sectional dimensions of 100X50MM, after the fence is fixed, with two on the 10th channel welded to the frame rails on both ends of the body from the outside inward 50mm, whole body backwards from the back-end 80mm. At the outer ends of sharp fall garden, garden angle 5MM, after the lower ground clearance fence 450MM. The left and right rear fence and were coated with a red and white color bar spacing of about 300mm.