En
Cn
RuHenghe HHR5160ZYS4DF Garbage compactor truck (#225)
Henghe garbage compactor truck HHR5160ZYS4DF (batch #225) based on DFL1160BX4 chassis is made in China by Hunan Hengrun Hi-Tech Co., Ltd. The company is located in Xiangtan, in Hunan Province, China.
HHR5160ZYS4DF
Overview
| Model | HHR5160ZYS4DF |
| Brand Name | Henghe |
| Bulletin | #225 |
| Type of vehicle | Garbage compactor truck |
| Country of origin | China |
| Chassis | DFL1160BX4 |
Manufacturer Profile
| Manufacturer | Hunan Hengrun Hi-Tech Co., Ltd. |
| Brands | |
| Type of manufacturer | Automobile manufacturer |
| City | Xiangtan |
| Province (Region) | Hunan Province |
| Country | China |
| Number of vehicles* | 153 models (670 items total) |
| * A number of models manufactured by Hunan Hengrun Hi-Tech Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | ISDe21040 ISDe18040 | 6700 4500 cc | 155 132 kW | ||||
| Performance | ||||
|---|---|---|---|---|
| Maximum speed | 90 km/h | 56 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 10600 kg | 10.6 t | 23,400 lbs | |
| Gross vehicle weight rating | 16000 kg | 16 t | 35,000 lbs | |
| Axle load distribution | 6000 kg / 10000 kg 6 t / 10 t 13,000 lbs / 22,000 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 8770 mm | 28′10″ | ||
| Overall width | 2480 mm | 8′2″ | ||
| Overall height | 3120 mm | 10′3″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 4500 mm, 4200 mm | 14′10″, 13′10″ | ||
| Front overhang | 1430 mm | 4′9″ | ||
| Rear overhang | 1000 mm | 3′4″ | ||
| Angle of approach | 20° | |||
| Angle of departure | 14° | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
1, extension 1840mm; 2, side guards using height 100mm vertical bar on the subframe bolted main beams, rails and vertical rod welding, vertical rod, bar the use of Q235 cold rolled steel folding welding, cross-section, thickness of 40mm, height above ground 490mm; later replaced by a dedicated device protection junk car, from high 505mm.