AUTO-CHE

Henghe HHR5121TQZ3DFP Wrecker (#225)

Henghe wrecker HHR5121TQZ3DFP (batch #225) based on DFL1120B7 chassis is made in China by Hunan Hengrun Hi-Tech Co., Ltd. The company is located in Xiangtan, in Hunan Province, China.

Henghe HHR5121TQZ3DFP wrecker

HHR5121TQZ3DFP

Overview
ModelHHR5121TQZ3DFP
Brand NameHenghe
Bulletin#225
Type of vehicleWrecker
Country of originChina
ChassisDFL1120B7
Manufacturer Profile
Manufacturer
Brands
Type of manufacturerAutomobile manufacturer
CityXiangtan
Province (Region)Hunan Province
CountryChina
Number of vehicles*153 models
(670 items total)
* A number of models manufactured by Hunan Hengrun Hi-Tech Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1EQH140-30 EQH160-30 YC4E140-33 YC4E140-30 YC4E160-33 YC4E160-30 EQH140-33 EQH160-33 YC6J160-334752 4752 4260 4260 4260 4260 4752 4752 6494 cc103 118 105 105 118 118 103 118 118 kW
Performance
Maximum speed90 km/h56 mph
Weights and Ground pressure
Curb weight7350 kg7.4 t16,204 lbs
Gross vehicle weight rating12490 kg12.5 t27,536 lbs
Axle load distribution4400 kg / 8090 kg
4.4 t / 8.1 t
9,700 lbs / 17,835 lbs
Dimensions
Overall length9300 mm / 9600 mm30′7″ / 31′6″
Overall width2450 mm8′1″
Overall height2700 mm / 2880 mm8′11″ / 9′6″
Undercarriage and Suspension
Number of axles2
Wheelbase4700 mm,
5000 mm
15′6″,
16′5″
Front overhang1430 mm4′9″
Rear overhang3000 mm9′11″
Angle of approach20°
Angle of departure11°
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

1, extension 170mm; 2, optional warning lights, while optional height of 2880mm; 3, corresponding to the length of 9300mm wheelbase 4700mm, 9600mm wheelbase corresponding to 5000mm, wheelbase corresponding Curb different changes in the standard range, so with the same curb weight; 4, with optional chassis cover. 5, left and right side of the fence and the protection of the toolbox composition, fence rails and vertical rods are used Q235A, 3mm thick steel plate bending forming and welded around the fence and then cross bracing beams welded into one section, the cross-coupling beam and chassis frame using bolts. Section height is 80mm, thickness 40mm, high off the ground 467mm; later replaced by a dedicated corbel protection agency, from high 531mm; 6, lifts the quality of 4945kg.