En
Cn
RuHenghe HHR5080TQZ4JHP Wrecker (#233)
Henghe wrecker HHR5080TQZ4JHP (batch #233) based on HFC1081K2F chassis is made in China by Hunan Hengrun Hi-Tech Co., Ltd. The company is located in Xiangtan, in Hunan Province, China.
HHR5080TQZ4JHP
Overview
| Model | HHR5080TQZ4JHP |
| Brand Name | Henghe |
| Bulletin | #233 |
| Type of vehicle | Wrecker |
| Country of origin | China |
| Chassis | HFC1081K2F |
Manufacturer Profile
| Manufacturer | Hunan Hengrun Hi-Tech Co., Ltd. |
| Brands | |
| Type of manufacturer | Automobile manufacturer |
| City | Xiangtan |
| Province (Region) | Hunan Province |
| Country | China |
| Number of vehicles* | 153 models (670 items total) |
| * A number of models manufactured by Hunan Hengrun Hi-Tech Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | ISF3.8s4141 | 3760 cc | 3.8 L | 230 cu in | 105 kW | 143 hp | |
| Performance | ||||
|---|---|---|---|---|
| Maximum speed | 95 km/h | 60 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 5100 kg | 5.1 t | 11,200 lbs | |
| Gross vehicle weight rating | 8495 kg | 8.5 t | 18,728 lbs | |
| Axle load distribution | 3060 kg / 5435 kg 3.1 t / 5.4 t 6,746 lbs / 11,982 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 7480 mm | 24′7″ | ||
| Overall width | 2300 mm | 7′7″ | ||
| Overall height | 2310 mm / 2490 mm | 7′7″ / 8′3″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 3815 mm | 12′7″ | ||
| Front overhang | 1085 mm | 3′7″ | ||
| Rear overhang | 2470 mm | 8′2″ | ||
| Angle of approach | 24° | |||
| Angle of departure | 11° | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
1, extension 110mm; 2, lifts the quality: 3200kg; 3, height optional warning lights, warning lights optional for 2490mm; 4, left and right side protection using Q235A, 3mm thick steel plate bending forming and welding cross bracing beams and chassis frame using bolts, section height is 80mm, thickness 40mm, high off the ground 275mm; After the protective arm mechanism instead of by special care from high 476mm.