AUTO-CHE

JAC JAC HFC5041CPYR93K7C2 Soft top box van truck (#237)

JAC soft top box van truck HFC5041CPYR93K7C2 (batch #237) based on HFC1041R93K7C2 chassis is made in China by Anhui Jianghuai Automobile Co., Ltd. (JAC). The company is located in Hefei, in Anhui Province, China.

JAC HFC5041CPYR93K7C2 soft top box van truck

HFC5041CPYR93K7C2

JAC logo Overview
ModelHFC5041CPYR93K7C2
Brand NameJAC logoJAC
Bulletin#237
Type of vehicleSoft top box van truck
Country of originChina
ChassisHFC1041R93K7C2
Manufacturer Profile
Manufacturer
 Anhui Jianghuai Automobile Co., Ltd., a subsidiary of JAC Motors.
Brand
Type of manufacturerAutomobile manufacturer
CityHefei
Province (Region)Anhui Province
CountryChina
Number of vehicles*5260 models
(18444 items total)
* A number of models manufactured by Anhui Jianghuai Automobile Co., Ltd. (JAC) found in Auto-che.com vehicle database
JAC logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1HFC4DA1-2C / YN33CRD12771 / 3298 cc88 / 85 kW
Performance
Maximum speed98 km/h61 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)0.7
Weights and Ground pressure
Curb weight2420 kg2.4 t5,335 lbs
Gross vehicle weight rating4120 kg4.1 t9,083 lbs
Axle load distribution1485 kg / 2635 kg
1.5 t / 2.6 t
3,274 lbs / 5,809 lbs
Dimensions
Overall length5995 mm19′9″
Overall width1910 mm / 2000 mm6′4″ / 6′7″
Overall height3200 mm10′6″
Cargo body
Cargo body length3200 mm10′6″
Cargo body width1810 mm / 1900 mm6′0″ / 6′3″
Cargo body height1850 mm6′1″
Undercarriage and Suspension
Number of axles2
Wheelbase3360 mm,
3308 mm
11′1″,
10′11″
Front/rear overhang1105 mm / 1530 mm,
1105 mm / 1582 mm
3′8″ / 5′1″,
3′8″ / 5′3″
Approach / departure angle24 / 15, 20 / 15 deg.
Miscellaneous
Seating capacity2+3
Steering controlsteering wheel
Additional Information

1 Dimensions w / the cargo body size width / Approach / rear overhang correspondence to: Wheelbase 3360:1) 1910/1810/24/1530, 2) 2000/1900/24/1530, wheelbase 3308:1) 1910/1810/20/1582, 2) 2000/1900/20/1582; ​​2 cargo compartment floor to the top of Punta formula height 2150mm;. 3 side does not open the door; 4 with optional chassis front panel enclosed , grille, front bumper, front combination lamps, front fog lights, lower endoscopy; 5 followed by optional chassis combination lamps; 6 optional side guards; 7 side and rear underrun protection device material Q235, as bolted connections, the rear guard section size (L × W): 120mm × 60mm, 480mm ground clearance