AUTO-CHE

FAW Fenghuang FAW Fenghuang FXC3310P66L2T4E Dump truck (#240)

FAW Fenghuang dump truck FXC3310P66L2T4E (batch #240) based on CA3310P66K2L6BT4E chassis is made in China by FAW Car Co., Ltd. Wuxi Diesel Engine Factory. The company is located in Wuxi, in Jiangsu Province, China.

FAW Fenghuang FXC3310P66L2T4E dump truck

FXC3310P66L2T4E

FAW Fenghuang logo Overview
ModelFXC3310P66L2T4E
Brand NameFAW Fenghuang logoFAW Fenghuang
Bulletin#240
Type of vehicleDump truck
Country of originChina
ChassisCA3310P66K2L6BT4E
Manufacturer Profile
Manufacturer
 A subsidiary of FAW Group Corporation (China First Automobile Group Corporation, First Automobile Works).
Brand
Type of manufacturerMachinery manufacturer
CityWuxi
Province (Region)Jiangsu Province
CountryChina
Number of vehicles*570 models
(1279 items total)
* A number of models manufactured by FAW Car Co., Ltd. Wuxi Diesel Engine Factory found in Auto-che.com vehicle database
FAW Fenghuang logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1CA6DL2-35E3 CA6DL2-33E3F CA6DL2-35E3F8600 8600 8600 cc270 249 261 kW
Performance
Environmental standardNational III / Euro 3
Maximum speed85 km/h53 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.00
Weights and Ground pressure
Curb weight15500 kg15.5 t34,200 lbs
Gross vehicle weight rating31000 kg31 t68,000 lbs
Axle load distribution6500 kg / 6500 kg / 18000 kg  (tandem axle)
6.5 t / 6.5 t / 18 t  (tandem axle)
14,300 lbs / 14,300 lbs / 40,000 lbs  (tandem axle)
Dimensions
Overall length11080 mm / 11280 mm36′5″ / 37′1″
Overall width2495 mm8′3″
Overall height3600 mm11′10″
Cargo body
Cargo body length8000 mm / 8200 mm26′3″ / 26′11″
Cargo body width2300 mm7′7″
Cargo body height1005 mm3′4″
Undercarriage and Suspension
Number of axles4
Wheelbase2100+4300+1350 mm6′11″+14′2″+4′6″
Front/rear overhang1470 mm / 1860 mm,
1470 mm / 2060 mm
4′10″ / 6′2″,
4′10″ / 6′10″
Approach / departure angle24 / 20, 24 / 18 deg.
Miscellaneous
Seating capacity2
Steering controlsteering wheel
Additional Information

Dump the way after unloading, when the vehicle length 11080mm, the corresponding overhang is 1860mm, departure angle of 20 degrees, interior length of 8000mm, while overall length is 11280mm, the corresponding overhang is 2060mm, departure angle 18 degrees, the interior length of 8200mm, curb weight change is less than 3%, and negligible environmental superstructure optional optional single door side rails made of steel Q235, side rails bolted connection is; .. After the fence is made of steel Q235, the fence is bolted connections, the cross-sectional dimensions of 120mmX50mm protective fence off the ground after high 550mm.;