En
Cn
Ru
Dongfeng EQ3318AT5 Dump truck (#228)
Dongfeng dump truck EQ3318AT5 (batch #228) based on DFL3318A4 chassis is made in China by Dongfeng Special Automobile Co., Ltd. The company is located in Shiyan, in Hubei Province, China.
EQ3318AT5
Overview
| Model | EQ3318AT5 |
| Brand Name |  Dongfeng |
| Bulletin | #228 |
| Type of vehicle | Dump truck |
| Country of origin | China |
| Chassis | DFL3318A4 |
Manufacturer Profile
| Manufacturer | Dongfeng Special Automobile Co., Ltd. |
| A subsidiary of DFM (Dongfeng Motor Corporation). | |
| Brand | |
| Type of manufacturer | Special vehicle manufacturer |
| City | Shiyan |
| Province (Region) | Hubei Province |
| Country | China |
| Number of vehicles* | 696 models (1900 items total) |
| * A number of models manufactured by Dongfeng Special Automobile Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | dCi340-30 / EQR340-33 / dCi375-30 / EQR375-33 / YC6M340-33 / YC6M340-31 / YC6M375-31 / YC6M375-33 / ISLe34030 / L34030 / ISLe37530 / L37530 | 11120 / 11120 / 11120 / 11120 / 9839 / 9839 / 9839 / 9839 / 8900 / 8900 / 8900 / 8900 cc | 250 / 250 / 276 / 275 / 250 / 250 / 276 / 276 / 250 / 250 / 275 / 276 kW | ||||
| Performance | ||||
|---|---|---|---|---|
| Maximum speed | 80 km/h | 50 mph | ||
| Capacity | ||||
|---|---|---|---|---|
| Load factor (the ratio of the payload of a vehicle to its weight) | 1.09 | |||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 14770 kg | 14.8 t | 32,562 lbs | |
| Gross vehicle weight rating | 31000 kg | 31 t | 68,000 lbs | |
| Axle load distribution | 6500 kg / 6500 kg / 18000 kg (tandem axle) 6.5 t / 6.5 t / 18 t (tandem axle) 14,300 lbs / 14,300 lbs / 40,000 lbs (tandem axle) | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 11300 mm / 11400 mm / 11500 mm | 37′1″ / 37′5″ / 37′9″ | ||
| Overall width | 2500 mm | 8′3″ | ||
| Overall height | 3450 mm / 3760 mm | 11′4″ / 12′5″ | ||
| Cargo body | ||||
|---|---|---|---|---|
| Cargo body length | 8400 mm / 8600 mm | 27′7″ / 28′3″ | ||
| Cargo body width | 2300 mm | 7′7″ | ||
| Cargo body height | 1000 mm | 3′4″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 4 | |||
| Wheelbase | 1850+4200+1450 mm, 1850+4600+1450 mm | 6′1″+13′10″+4′10″, 6′1″+15′2″+4′10″ | ||
| Front/rear overhang | 1500 mm / 1900 mm, 1500 mm / 2000 mm, 1500 mm / 2100 mm | 5′0″ / 6′3″, 5′0″ / 6′7″, 5′0″ / 6′11″ | ||
| Approach / departure angle | 30 / 32, 30 / 31, 30 / 30 deg. | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 2, 3 | |||
| Steering control | steering wheel | |||
Additional Information
1, dump mode after tilting. 2, curb weight differences due to the car caused by the change in length of 3% range, negligible. 3, only a selection of the car on the chassis 1850 +4600 +1450 mm wheelbase. 4, Foreign Minister - car long - wheelbase - rear suspension - departure angle (mm) correspondence between the following :11300 -8400-1850 +4600 +4600 +1450-2000-31 +1450-1900-32,11400-8600-1850 ,11500 -8600-1850 +4600 +1450-2100-30. 5, with optional chassis cab high roof. 6, the optional new container structure.7, corresponding to a total length 11400mm 8600mm long car corresponds to flat cab car length 8600mm overall length 11500mm corresponding corresponding high roof cab. 8, with optional chassis under the new endoscopy. 9, guards the materials used Material: Q235, Connection: bolt connection, cross-sectional dimensions of the rear protective device (mm): 110 × 100, ground clearance: 430mm.