AUTO-CHE

Huachuan DZ3045S2 Dump truck (#238)

Huachuan dump truck DZ3045S2 (batch #238) based on DZ3045S2D II chassis (mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China) is made in China by Yunnei Dongli Dazhou Automobile Co., Ltd. The company is located in Dazhou, in Sichuan Province, China.

Huachuan DZ3045S2 dump truck

DZ3045S2

Huachuan DZ3045S2 dump truck Huachuan DZ3045S2 dump truck Huachuan DZ3045S2 dump truck
Overview
ModelDZ3045S2
Brand NameHuachuan
Bulletin#238
Type of vehicleDump truck
VIN
  • LDZ3S4CD×××××××××
Country of originChina
ChassisDZ3045S2D II
 mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityDazhou
Province (Region)Sichuan Province
CountryChina
Number of vehicles*77 models
(121 items total)
* A number of models manufactured by Yunnei Dongli Dazhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed75 km/h47 mph
ABSnone
Capacity
Rated load capacity1490 kg1.5 t3,285 lbs
Load factor (the ratio of the payload of a vehicle to its weight)0.65
Weights and Ground pressure
Curb weight2590 kg2.6 t5,710 lbs
Gross vehicle weight rating4275 kg4.3 t9,425 lbs
Axle load distribution1710 kg / 2565 kg
1.7 t / 2.6 t
3,770 lbs / 5,655 lbs
Dimensions
Overall length5980 mm19′8″
Overall width2200 mm7′3″
Overall height2520 mm8′4″
Cargo body
Cargo body length3750 mm12′4″
Cargo body width600 mm / 800 mm2′0″ / 2′8″
Cargo body height2100 mm6′11″
Undercarriage and Suspension
Number of axles2
Wheelbase3310 mm10′11″
Front track1750 mm5′9″
Rear track1630 mm5′5″
Front overhang1200 mm4′0″
Rear overhang1470 mm4′10″
Angle of approach30°
Angle of departure22°
Leaf springs8 / 11+8
Tyres and Wheels
Number of tyres6
Tyres dimension7.50-16
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

Dump mode after dumping.Side, rear protective device material: Q235 are used hot press forming of 3mm steel bar, combination welding. Side protection with M12 × 25 bolts attached to the cargo compartment crossbar after guards with M12 × 30 bolts at the end of the frame rails. Section size (H × W) after the protective device is 120 × 45mm, maximum ground clearance under the edge of 490mm.