AUTO-CHE

Huachuan DZ3045 Dump truck (#237)

Huachuan dump truck DZ3045 (batch #237) based on DZ3045D II chassis (mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China) is made in China by Yunnei Dongli Dazhou Automobile Co., Ltd. The company is located in Dazhou, in Sichuan Province, China.

Huachuan DZ3045 dump truck

DZ3045

Huachuan DZ3045 dump truck Huachuan DZ3045 dump truck Huachuan DZ3045 dump truck
Overview
ModelDZ3045
Brand NameHuachuan
Bulletin#237
Type of vehicleDump truck
VIN
  • LDZ3C8CD×××××××××
Country of originChina
ChassisDZ3045D II
 mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityDazhou
Province (Region)Sichuan Province
CountryChina
Number of vehicles*77 models
(121 items total)
* A number of models manufactured by Yunnei Dongli Dazhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed75 km/h47 mph
ABSnone
Capacity
Rated load capacity1495 kg1.5 t3,296 lbs
Load factor (the ratio of the payload of a vehicle to its weight)0.65
Weights and Ground pressure
Curb weight2600 kg2.6 t5,700 lbs
Gross vehicle weight rating4290 kg4.3 t9,458 lbs
Axle load distribution1715 kg / 2575 kg
1.7 t / 2.6 t
3,781 lbs / 5,677 lbs
Dimensions
Overall length6290 mm20′8″
Overall width2250 mm7′5″
Overall height2510 mm8′3″
Cargo body
Cargo body length3750 mm12′4″
Cargo body width600 mm / 800 mm2′0″ / 2′8″
Cargo body height2100 mm6′11″
Undercarriage and Suspension
Number of axles2
Wheelbase3800 mm12′6″
Front track1645 mm5′5″
Rear track1640 mm5′5″
Front overhang885 mm2′11″
Rear overhang1605 mm5′4″
Angle of approach27°
Angle of departure20°
Leaf springs8 / 11+8
Tyres and Wheels
Number of tyres6
Tyres dimension7.50-16
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

Dump mode after dumping. Side, rear protective device material: Q235 are used hot press forming of 3mm steel bar, combination welding. Side protection with M12 × 25 bolts attached to the cargo compartment crossbar after guards with M12 × 30 bolts at the end of the frame rails.After the cross-sectional dimensions (width × height) guard is 100 × 50mm, the maximum height above the ground of the lower edge of 420mm.