AUTO-CHE

Huachuan DZ3041 Dump truck (#229)

Huachuan dump truck DZ3041 (batch #229) based on DZ1041 chassis (mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China) is made in China by Yunnei Dongli Dazhou Automobile Co., Ltd. The company is located in Dazhou, in Sichuan Province, China.

Huachuan DZ3041 dump truck

DZ3041

Overview
ModelDZ3041
Brand NameHuachuan
Bulletin#229
Type of vehicleDump truck
VIN
  • LDZ3C3BD××××××××× LDZ3C4BD×××××××××
Country of originChina
ChassisDZ1041
 mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityDazhou
Province (Region)Sichuan Province
CountryChina
Number of vehicles*77 models
(121 items total)
* A number of models manufactured by Yunnei Dongli Dazhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YN27CR-12672 cc2.7 L164 cu in52.5 kW71 hp
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed75 km/h47 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)0.65
Weights and Ground pressure
Curb weight2600 kg2.6 t5,700 lbs
Gross vehicle weight rating4290 kg4.3 t9,458 lbs
Axle load distribution1710 kg / 2580 kg
1.7 t / 2.6 t
3,770 lbs / 5,688 lbs
Dimensions
Overall length5430 mm / 5630 mm17′10″ / 18′6″
Overall width2000 mm6′7″
Overall height2360 mm7′9″
Cargo body
Cargo body length2920 mm / 3120 mm9′7″ / 10′3″
Cargo body width1900 mm6′3″
Cargo body height400 mm / 450 mm / 500 mm / 600 mm1′4″ / 1′6″ / 1′8″ / 2′0″
Undercarriage and Suspension
Number of axles2
Wheelbase3250 mm,
3400 mm
10′8″,
11′2″
Front track1585 mm5′3″
Rear track1540 mm5′1″
Front/rear overhang850 mm / 1330 mm,
850 mm / 1380 mm
2′10″ / 4′5″,
2′10″ / 4′7″
Angle of approach27°
Angle of departure20°
Leaf springs8 / 11+8
Tyres and Wheels
Number of tyres6
Tyres dimension7.00-16
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

When the wheelbase is 3250mm, vehicle length 5430mm, container length 2920mm, container column is 400mm/450mm/500mm, rear overhang is 1330mm. When the wheelbase is 3400mm, vehicle length 5630mm, container length 3120mm, cargo body is 500mm/600mm, Rear overhang is 1380mm. Side, rear protective device material: Q235 are used hot press forming of 3mm steel bar, combination welding. Side protection with M12 × 25 bolts attached to the cargo compartment crossbar after guards with M12 × 30 bolts at the end of the frame rails.Section size (H × W) after the protective device is 100 × 40mm, maximum ground clearance under the edge of 550mm.