AUTO-CHE

Huachuan DZ3040 Dump truck (#238)

Huachuan dump truck DZ3040 (batch #238) based on DZ3040D II chassis (mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China) is made in China by Yunnei Dongli Dazhou Automobile Co., Ltd. The company is located in Dazhou, in Sichuan Province, China.

Huachuan DZ3040 dump truck

DZ3040

Overview
ModelDZ3040
Brand NameHuachuan
Bulletin#238
Type of vehicleDump truck
VIN
  • LDZ3C3BD××××××××× LDZ3C4BD×××××××××
Country of originChina
ChassisDZ3040D II
 mfg by Sichuan Yunnei Dongli Dazhou Automobile Co. Ltd., China
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityDazhou
Province (Region)Sichuan Province
CountryChina
Number of vehicles*77 models
(121 items total)
* A number of models manufactured by Yunnei Dongli Dazhou Automobile Co., Ltd. found in Auto-che.com vehicle database
Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1YN27PE-12672 cc2.7 L164 cu in66 kW90 hp
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed75 km/h47 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)0.65
Weights and Ground pressure
Curb weight2590 kg2.6 t5,710 lbs
Gross vehicle weight rating4275 kg4.3 t9,425 lbs
Axle load distribution1710 kg / 2565 kg
1.7 t / 2.6 t
3,770 lbs / 5,655 lbs
Dimensions
Overall length5500 mm / 5700 mm18′1″ / 18′9″
Overall width2000 mm6′7″
Overall height2330 mm7′8″
Cargo body
Cargo body length2920 mm / 3120 mm9′7″ / 10′3″
Cargo body width1850 mm6′1″
Cargo body height450 mm / 500 mm1′6″ / 1′8″
Undercarriage and Suspension
Number of axles2
Wheelbase3250 mm,
3400 mm
10′8″,
11′2″
Front track1585 mm5′3″
Rear track1540 mm5′1″
Front/rear overhang885 mm / 1365 mm,
885 mm / 1415 mm
2′11″ / 4′6″,
2′11″ / 4′8″
Angle of approach27°
Angle of departure20°
Leaf springs8 / 11+8
Tyres and Wheels
Number of tyres6
Tyres dimension7.00-16, 7.50-16
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

When the wheelbase is 3250mm, vehicle length 5500mm, container length 2920mm, cargo body is 450mm/500mm, Rear overhang is 1365mm. When the wheelbase is 3400mm, vehicle length 5700mm, container length 3120mm, cargo body is 450mm/500mm, Rear overhang is 1415mm. Dump mode after dumping. Side, rear protective device material: Q235 are used hot press forming of 3mm steel bar, combination welding. Side protection with M12 × 25 bolts attached to the cargo compartment crossbar after guards with M12 × 30 bolts at the end of the frame rails.After the cross-sectional dimensions (width × height) guard is 100 × 40mm, the maximum height above the ground of the lower edge of 420mm.