En
Cn
Ru
Dima DMT5170XYCA Cash transit van (#247)
Dima cash transit van DMT5170XYCA (batch #247) based on Mercedes-Benz Axor 1828 II chassis (mfg by Daimler AG) is made in China by Chongqing Dima Industry Co., Ltd. The company is located in Zhongqing, in Chongqing Municipality, China.
DMT5170XYCA
Overview
| Model | DMT5170XYCA |
| Brand Name |  Dima |
| Bulletin | #247 |
| Type of vehicle | Cash transit van |
| VIN |
|
| Country of origin | China |
| Chassis | Mercedes-Benz Axor 1828 II |
| mfg by Daimler AG |
Manufacturer Profile
| Manufacturer | Chongqing Dima Industry Co., Ltd. |
| Brand | |
| Type of manufacturer | Automobile manufacturer |
| City | Zhongqing |
| Province (Region) | Chongqing Municipality |
| Country | China |
| Number of vehicles* | 626 models (1525 items total) |
| * A number of models manufactured by Chongqing Dima Industry Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | OM906LA.III / 4 | 6374 cc | 6.4 L | 389 cu in | 205 kW | 279 hp | |
| Performance | ||||
|---|---|---|---|---|
| Fuel | diesel fuel | |||
| Environmental standard | National III / Euro 3 | |||
| Maximum speed | 118 km/h | 74 mph | ||
| Capacity | ||||
|---|---|---|---|---|
| Rated load capacity | 8000 kg, 7880 kg, 7350 kg, 7120 kg | 8 t, 7.9 t, 7.4 t, 7.1 t | 18,000 lbs, 17,372 lbs, 16,204 lbs, 15,697 lbs | |
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 8805 kg, 8925 kg, 9455 kg, 9685 kg | 8.8 t, 8.9 t, 9.5 t, 9.7 t | 19,412 lbs, 19,676 lbs, 20,845 lbs, 21,352 lbs | |
| Gross vehicle weight rating | 17000 kg | 17 t | 37,000 lbs | |
| Axle load distribution | 5850 kg / 11150 kg 5.9 t / 11.2 t 12,897 lbs / 24,582 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 8150 mm / 8300 mm / 8450 mm / 8600 mm | 26′9″ / 27′3″ / 27′9″ / 28′3″ | ||
| Overall width | 2500 mm | 8′3″ | ||
| Overall height | 3190 mm | 10′6″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 4500 mm | 14′10″ | ||
| Front track | 2053 mm | 6′9″ | ||
| Rear track | 1802 mm | 5′11″ | ||
| Front/rear overhang | 1440 mm / 2210 mm, 1590 mm / 2210 mm, 1440 mm / 2510 mm, 1590 mm / 2510 mm | 4′9″ / 7′4″, 5′3″ / 7′4″, 4′9″ / 8′3″, 5′3″ / 8′3″ | ||
| Approach / departure angle | 15 / 14, 14 / 14, 15 / 13, 14 / 13 deg. | |||
| Leaf springs | - / - | |||
| Tyres and Wheels | ||||
|---|---|---|---|---|
| Number of tyres | 6 | |||
| Tyres dimension | 295/80R22.5 | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
1 No front bumper bumper optional, optional hydraulic lift tailgate, no optional sun shade. The top of the envelope closed, not open. When no optional front bumper bumper car length 8150mm, front overhang is 1440mm, curb weight is 8805kg; When only optional front bumper bumper car length is 8300mm, the front overhang is 1590mm, curb weight is 8925kg; when the election only after the installation of hydraulic lifting tailgate, vehicle length is 8450mm, rear overhang is 2510mm, curb weight is 9455kg; At the same time the front bumper bumper and optional hydraulic lift tailgate, vehicle length is 8600mm; optional Configure the inner wall of decorative stainless steel cabinet 2.0mm, 3.0mm tread plate floor, with stainless steel bar stock fender, when stopped booms, after partition, and all other configurations, this time curb weight is 9685kg. Hydraulic tailgate quality of 650kg. Optional on both sides of the wing cabinet door, rear single door. The car should be installed in the rear of the body reflective logo. Approach / departure angle can be as follows: 14/13 front suspension rear suspension (mm) also for: 1590/2510 2 Material lateral protective device for steel, connection to bolt connection, cross-sectional dimensions of 100mm × 50mm, ground clearance is 495mm. 3 Install drive recorder.