En
Cn
Ru
Dima DMT5130XYC Cash transit van (#240)
Dima cash transit van DMT5130XYC (batch #240) based on Mercedes-Benz Atego 1323 II chassis (mfg by Daimler AG) is made in China by Chongqing Dima Industry Co., Ltd. The company is located in Zhongqing, in Chongqing Municipality, China.
DMT5130XYC
Overview
| Model | DMT5130XYC |
| Brand Name |  Dima |
| Bulletin | #240 |
| Type of vehicle | Cash transit van |
| VIN |
|
| Country of origin | China |
| Chassis | Mercedes-Benz Atego 1323 II |
| mfg by Daimler AG |
Manufacturer Profile
| Manufacturer | Chongqing Dima Industry Co., Ltd. |
| Brand | |
| Type of manufacturer | Automobile manufacturer |
| City | Zhongqing |
| Province (Region) | Chongqing Municipality |
| Country | China |
| Number of vehicles* | 626 models (1525 items total) |
| * A number of models manufactured by Chongqing Dima Industry Co., Ltd. found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | OM906LA.III / 2 | 6374 cc | 6.4 L | 389 cu in | 170 kW | 232 hp | |
| Performance | ||||
|---|---|---|---|---|
| Fuel | diesel fuel | |||
| Environmental standard | National III / Euro 3 | |||
| Maximum speed | 110 km/h | 69 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 7400 kg, 7520 kg, 8000 kg, 8140 kg | 7.4 t, 7.5 t, 8 t, 8.1 t | 16,300 lbs, 16,579 lbs, 18,000 lbs, 17,946 lbs | |
| Gross vehicle weight rating | 13450 kg | 13.5 t | 29,652 lbs | |
| Axle load distribution | 4700 kg / 8750 kg 4.7 t / 8.8 t 10,400 lbs / 19,290 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 6880 mm / 7000 mm / 7120 mm / 7240 mm | 22′7″ / 23′0″ / 23′5″ / 23′10″ | ||
| Overall width | 2495 mm | 8′3″ | ||
| Overall height | 2995 mm | 9′10″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 3560 mm | 11′9″ | ||
| Front track | 1975 mm | 6′6″ | ||
| Rear track | 1838 mm | 6′1″ | ||
| Front/rear overhang | 1440 mm / 1880 mm, 1560 mm / 1880 mm, 1440 mm / 2120 mm | 4′9″ / 6′3″, 5′2″ / 6′3″, 4′9″ / 7′0″ | ||
| Approach / departure angle | 18 / 16, 17 / 16, 18 / 15 deg. | |||
| Leaf springs | 2 / 3, - / - | |||
| Tyres and Wheels | ||||
|---|---|---|---|---|
| Number of tyres | 6 | |||
| Tyres dimension | 265/70R19.5 | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3 | |||
| Steering control | steering wheel | |||
Additional Information
1 front suspension rear suspension (mm) also for: 1560/2120 close to departure angle (°) can be as follows: 17/15 front bumper bumper without optional, optional hydraulic lift tailgate, election installed without sun shade, with optional chassis front lights, front and rear axle air suspension can also be installed on top envelope closed, not open. When no optional front bumper bumper car length 6880mm, front overhang is 1440mm, curb weight is 7400kg; When only optional front bumper bumper car length is 7000mm, the front overhang is 1560mm, curb weight is 7520kg; when the election only after the installation of hydraulic lifting tailgate, vehicle length is 7120mm, rear overhang is 2120mm, curb weight is 8000kg; At the same time the front bumper bumper and optional hydraulic lift tailgate, vehicle length is 7240mm; optional Configure the inner wall of decorative stainless steel cabinet 2.0mm, 3.0mm tread plate floor, with stainless steel bar stock fender, when stopped booms, after partition, and all other configurations, this time curb weight is 8140kg. Hydraulic tailgate quality of 600kg. Optional on both sides of the wing cabinet door, rear single door. The car should be installed in the rear of the body reflective logo. 2 .. side, the protective material is Q235, connections were bolted and welded; protection section dimensions of 100mm × 80mm and Φ100mm × 3mm, ground clearance is 540mm.