AUTO-CHE

Dima Dima DMT5130XYC Cash transit van (#230)

Dima cash transit van DMT5130XYC (batch #230) based on Mercedes-Benz Atego 1323 II chassis (mfg by Daimler AG) is made in China by Chongqing Dima Industry Co., Ltd. The company is located in Zhongqing, in Chongqing Municipality, China.

Dima DMT5130XYC cash transit van

DMT5130XYC

Dima logo Overview
ModelDMT5130XYC
Brand NameDima logoDima
Bulletin#230
Type of vehicleCash transit van
VIN
  • WDAYLC96×××××××××
Country of originChina
ChassisMercedes-Benz Atego 1323 II
 mfg by Daimler AG
Manufacturer Profile
Manufacturer
Brand
Type of manufacturerAutomobile manufacturer
CityZhongqing
Province (Region)Chongqing Municipality
CountryChina
Number of vehicles*626 models
(1525 items total)
* A number of models manufactured by Chongqing Dima Industry Co., Ltd. found in Auto-che.com vehicle database
Dima logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1OM906LA.III / 26374 cc6.4 L389 cu in170 kW232 hp
Performance
Fueldiesel fuel
Environmental standardNational III / Euro 3
Maximum speed110 km/h69 mph
Weights and Ground pressure
Curb weight7400 kg,
7520 kg,
8000 kg,
8140 kg
7.4 t,
7.5 t,
8 t,
8.1 t
16,300 lbs,
16,579 lbs,
18,000 lbs,
17,946 lbs
Gross vehicle weight rating13450 kg13.5 t29,652 lbs
Axle load distribution4700 kg / 8750 kg
4.7 t / 8.8 t
10,400 lbs / 19,290 lbs
Dimensions
Overall length6880 mm / 7000 mm / 7120 mm / 7240 mm22′7″ / 23′0″ / 23′5″ / 23′10″
Overall width2495 mm8′3″
Overall height2995 mm9′10″
Undercarriage and Suspension
Number of axles2
Wheelbase3560 mm11′9″
Front track1975 mm6′6″
Rear track1838 mm6′1″
Front/rear overhang1440 mm / 1880 mm,
1560 mm / 1880 mm,
1440 mm / 2120 mm
4′9″ / 6′3″,
5′2″ / 6′3″,
4′9″ / 7′0″
Approach / departure angle18 / 16, 17 / 16, 18 / 15 deg.
Leaf springs2 / 3, - / -
Tyres and Wheels
Number of tyres6
Tyres dimension265/70R19.5
Miscellaneous
Seating capacity3
Steering controlsteering wheel
Additional Information

1 front suspension rear suspension (mm) also for: 1560/2120 close to departure angle (°) can be as follows: 17/15 front bumper bumper without optional, optional hydraulic lift tailgate, election installed without sun shade, with optional chassis front lights, front and rear axle air suspension can also be installed on top envelope closed, not open. When no optional front bumper bumper car length 6880mm, front overhang is 1440mm, curb weight is 7400kg; When only optional front bumper bumper car length is 7000mm, the front overhang is 1560mm, curb weight is 7520kg; when the election only after the installation of hydraulic lifting tailgate, vehicle length is 7120mm, rear overhang is 2120mm, curb weight is 8000kg; At the same time the front bumper bumper and optional hydraulic lift tailgate, vehicle length is 7240mm; optional Configure the inner wall of decorative stainless steel cabinet 2.0mm, 3.0mm tread plate floor, with stainless steel bar stock fender, when stopped booms, after partition, and all other configurations, this time curb weight is 8140kg. Hydraulic tailgate quality of 600kg. Optional on both sides of the wing cabinet door, rear single door. The car should be installed in the rear of the body reflective logo. 2 .. side, the protective material is Q235, connections were bolted and welded; protection section dimensions of 100mm × 80mm and Φ100mm × 3mm, ground clearance is 540mm.