Dongfeng DFZ3070FD3G Dump truck (#205)
Dongfeng dump truck DFZ3070FD3G (batch #205) is made in China by Dongfeng Suizhou Special Vehicle Co., Ltd. The company is located in Suizhou, in Hubei Province, China.
DFZ3070FD3G
Overview
Model | DFZ3070FD3G |
Brand Name | Dongfeng |
Bulletin | #205 |
Type of vehicle | Dump truck |
Country of origin | China |
Chassis | mfg by Dongfeng Automobile Co., Ltd. - a subsidiary of Dongfeng Motor Corporation (DFMC), China |
Manufacturer Profile
Manufacturer | Dongfeng Suizhou Special Vehicle Co., Ltd. |
A subsidiary of DFM (Dongfeng Motor Corporation). | |
Brand | |
Type of manufacturer | Special purpose vehicle manufacturer |
City | Suizhou |
Province (Region) | Hubei Province |
Country | China |
Number of vehicles* | 582 models (1420 items total) |
* A number of models manufactured by Dongfeng Suizhou Special Vehicle Co., Ltd. found in Auto-che.com vehicle database |
Technical specifications
Performance | ||||
---|---|---|---|---|
Maximum speed | 80 km/h | 50 mph |
Capacity | ||||
---|---|---|---|---|
Load factor (the ratio of the payload of a vehicle to its weight) | 0.75 |
Weights and Ground pressure | ||||
---|---|---|---|---|
Curb weight | 4250 kg | 4.3 t | 9,370 lbs | |
Gross vehicle weight rating | 7440 kg | 7.4 t | 16,402 lbs | |
Axle load distribution | 2240 kg / 5200 kg 2.2 t / 5.2 t 4,938 lbs / 11,500 lbs |
Dimensions | ||||
---|---|---|---|---|
Overall length | 6750 mm / 7000 mm | 22′2″ / 23′0″ | ||
Overall width | 2470 mm | 8′2″ | ||
Overall height | 2475 mm | 8′2″ |
Cargo body | ||||
---|---|---|---|---|
Cargo body length | 3850 mm / 4200 mm | 12′8″ / 13′10″ | ||
Cargo body width | 2250 mm | 7′5″ | ||
Cargo body height | 800 mm | 2′8″ |
Undercarriage and Suspension | ||||
---|---|---|---|---|
Front overhang | 1065 mm | 3′6″ | ||
Rear overhang | 1735 mm | 5′9″ | ||
Angle of approach | 34° | |||
Angle of departure | 33° |
Miscellaneous | ||||
---|---|---|---|---|
Seating capacity | 3 | |||
Steering control | steering wheel |
Additional Information
Total length, hand length and wheelbase correspondence, due to dimensional changes caused by changes in quality parameters of less than 3%, so only marked a curb weight. Compartment dump mode after dump.