AUTO-CHE

Dongfeng Dongfeng DFL5311XXYAX3A Box van truck (#237)

Dongfeng box van truck DFL5311XXYAX3A (batch #237) based on DFL1311AX3A chassis is made in China by Dongfeng Motor Co., Ltd. The company is located in Wuhan, in Hubei Province, China.

Dongfeng DFL5311XXYAX3A box van truck

DFL5311XXYAX3A

Dongfeng logo Overview
ModelDFL5311XXYAX3A
Brand NameDongfeng logoDongfeng
Bulletin#237
Type of vehicleBox van truck
Country of originChina
ChassisDFL1311AX3A
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brands
Type of manufacturerAutomobile manufacturer
CityWuhan
Province (Region)Hubei Province
CountryChina
Number of vehicles*1977 models
(6954 items total)
* A number of models manufactured by Dongfeng Motor Co., Ltd. found in Auto-che.com vehicle database
Dongfeng logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1ISDe24530 ISDe27030 ISLe29030 L27030 L29030 C260336700 6700 8900 8900 8900 8300 cc180 198 213 199 213 191 kW
Performance
Maximum speed90 km/h56 mph
Capacity
Load factor (the ratio of the payload of a vehicle to its weight)1.83
Weights and Ground pressure
Curb weight10970 kg11 t24,185 lbs
Gross vehicle weight rating31000 kg31 t68,000 lbs
Axle load distribution6500 kg / 6500 kg / 18000 kg  (tandem axle)
6.5 t / 6.5 t / 18 t  (tandem axle)
14,300 lbs / 14,300 lbs / 40,000 lbs  (tandem axle)
Dimensions
Overall length11980 mm39′4″
Overall width2500 mm8′3″
Overall height3980 mm13′1″
Cargo body
Cargo body length9400 mm / 9600 mm30′11″ / 31′6″
Cargo body width2400 mm7′11″
Cargo body height2400 mm / 2500 mm7′11″ / 8′3″
Undercarriage and Suspension
Number of axles4
Wheelbase1950+4250+1300 mm,
1950+4250+1350 mm,
1950+4500+1300 mm
6′5″+14′0″+4′4″,
6′5″+14′0″+4′6″,
6′5″+14′10″+4′4″
Front/rear overhang1460 mm / 3020 mm,
1460 mm / 2970 mm,
1460 mm / 2770 mm
4′10″ / 9′11″,
4′10″ / 9′9″,
4′10″ / 9′2″
Approach / departure angle28 / 10, 28 / 11 deg.
Miscellaneous
Seating capacity2, 3
Steering controlsteering wheel
Additional Information

Peace optional high roof cab roof, cab high roof top air horn as attachments; envelope at the top closed, not open; optional side door and do not open the door; envelope flat and corrugated board selected two structural types. Flat cab compartment corresponding 9600mm long; high roof cab car corresponds to 9400mm long. Cab seats: 2 corresponds to the quality of 19900,3 person who set the corresponding load mass 19835; former option under endoscopic installation location. Side protection: Material Q235, bolted connections under protection after: Material Q235, bolted connections, section size 120 × 60mm, ground clearance 420mm.