AUTO-CHE

Dongfeng Dongfeng DFC3310A9 Dump truck (#222)

Dongfeng dump truck DFC3310A9 (batch #222) based on DFL3310A9 chassis is made in China by Dongfeng Special Vehicle Co., Ltd. The company is located in Shiyan, in Hubei Province, China.

Dongfeng DFC3310A9 dump truck

DFC3310A9

Dongfeng logo Overview
ModelDFC3310A9
Brand NameDongfeng logoDongfeng
Bulletin#222
Type of vehicleDump truck
Country of originChina
ChassisDFL3310A9
Manufacturer Profile
Manufacturer
 A subsidiary of DFM (Dongfeng Motor Corporation).
Brand
Type of manufacturerSpecial purpose vehicle manufacturer
CityShiyan
Province (Region)Hubei Province
CountryChina
Number of vehicles*166 models
(355 items total)
* A number of models manufactured by Dongfeng Special Vehicle Co., Ltd. found in Auto-che.com vehicle database
Dongfeng logo Technical specifications
#Engine modelEngine displacementEngine powerEngine manufacturer
1dCi340-30 / dCi290-30 / YC6M340-30 / YC6M290-30 / YC6M340-31 / ISLe34030 / ISLe29030 / YC6M290-33 / YC6M340-33 / L3403011120 / 11120 / 9839 / 9839 / 9839 / 8900 / 8900 / 9839 / 9839 / 8900 cc250 / 213 / 250 / 215 / 250 / 250 / 213 / 215 / 250 / 250 kW
Performance
Maximum speed80 km/h50 mph
Capacity
Quasi-total mass of trailer10000 kg10 t22,000 lbs
Load factor (the ratio of the payload of a vehicle to its weight)1.09, 1.05
Weights and Ground pressure
Curb weight14770 kg,
15050 kg
14.8 t,
15.1 t
32,562 lbs,
33,180 lbs
Gross vehicle weight rating31000 kg31 t68,000 lbs
Axle load distribution6500 kg / 6500 kg / 18000 kg  (tandem axle)
6.5 t / 6.5 t / 18 t  (tandem axle)
14,300 lbs / 14,300 lbs / 40,000 lbs  (tandem axle)
Dimensions
Overall length10270 mm / 10470 mm33′9″ / 34′5″
Overall width2500 mm8′3″
Overall height3450 mm11′4″
Cargo body
Cargo body length7200 mm / 7400 mm23′8″ / 24′4″
Cargo body width2300 mm7′7″
Cargo body height1100 mm3′8″
Undercarriage and Suspension
Number of axles4
Wheelbase1850+3200+1350 mm,
1850+3400+1350 mm,
1950+3100+1350 mm,
1950+3300+1350 mm
6′1″+10′6″+4′6″,
6′1″+11′2″+4′6″,
6′5″+10′3″+4′6″,
6′5″+10′10″+4′6″
Front/rear overhang1500 mm / 2170 mm,
1500 mm / 2370 mm
5′0″ / 7′2″,
5′0″ / 7′10″
Approach / departure angle30 / 30, 30 / 29 deg.
Miscellaneous
Seating capacity2, 3
Steering controlsteering wheel
Additional Information

Container optional side plate structure, only the wheelbase 1950 +3400 +1350 +3300 +1350,1850, dump mode after unloading cargo compartment when the cover is not installed, the curb weight of 14,770, set on the quality of 16100,16035 when, when the optional roof cargo box, cover the quality of the 280, the curb weight is 15,050, set quality 15820,15755, 10270 corresponds to two kinds of ministers wheelbase, rear suspension are 2170, 10470 corresponds to two kinds wheelbase Minister After hanging are 2370, mass configuration parameter changes caused by the change in less than 3%, is negligible. With the optional chassis front lower endoscopy installation location.