FAW Jiefang CA3250P67K2L4T1AE4 Diesel cabover dump truck (#240)
FAW Jiefang diesel cabover dump truck CA3250P67K2L4T1AE4 (batch #240) based on CA3250P67K2L4BT1AE4 chassis is made in China by China First Automobile Group Corporation. The company is located in Changchun, in Jilin Province, China.
CA3250P67K2L4T1AE4
Overview
Model | CA3250P67K2L4T1AE4 |
Brand Name | FAW Jiefang |
Bulletin | #240 |
Type of vehicle | Diesel cabover dump truck |
Country of origin | China |
Chassis | CA3250P67K2L4BT1AE4 |
Manufacturer Profile
Manufacturer | China First Automobile Group Corporation |
A subsidiary of FAW Group Corporation (China First Automobile Group Corporation, First Automobile Works). | |
Brands | |
Type of manufacturer | Automobile and off-road vehicle manufacturer |
City | Changchun |
Province (Region) | Jilin Province |
Country | China |
Number of vehicles* | 4579 models (12748 items total) |
* A number of models manufactured by China First Automobile Group Corporation found in Auto-che.com vehicle database |
Technical specifications
# | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
---|---|---|---|---|---|---|---|
1 | CA6DL2-35E4U1 / CA6DL2-33E4U1 / CA6DL2-31E4U1 / CA6DL2-29E4U1 / CA6DL2-35E4U2 / CA6DL2-33E4U2 / CA6DL2-31E4U2 / CA6DL2-29E4U2 | 8600 / 8600 / 8600 / 8600 / 8600 / 8600 / 8600 / 8600 cc | 261 / 249 / 231 / 218 / 261 / 249 / 231 / 218 kW |
Performance | ||||
---|---|---|---|---|
Environmental standard | National IV / Euro 4 | |||
Maximum speed | 71 km/h | 45 mph |
Capacity | ||||
---|---|---|---|---|
Quasi-total mass of trailer | 9900 kg | 9.9 t | 21,800 lbs | |
Load factor (the ratio of the payload of a vehicle to its weight) | 1.01 |
Weights and Ground pressure | ||||
---|---|---|---|---|
Curb weight | 12430 kg | 12.4 t | 27,403 lbs | |
Gross vehicle weight rating | 25000 kg | 25 t | 55,000 lbs | |
Axle load distribution | 7000 kg / 18000 kg (tandem axle) 7 t / 18 t (tandem axle) 15,000 lbs / 40,000 lbs (tandem axle) |
Dimensions | ||||
---|---|---|---|---|
Overall length | 9950 mm / 10050 mm / 10180 mm | 32′8″ / 33′0″ / 33′5″ | ||
Overall width | 2500 mm | 8′3″ | ||
Overall height | 3600 mm | 11′10″ |
Cargo body | ||||
---|---|---|---|---|
Cargo body length | 7200 mm / 7500 mm / 7800 mm | 23′8″ / 24′8″ / 25′8″ | ||
Cargo body width | 2300 mm | 7′7″ | ||
Cargo body height | 865 mm | 2′11″ |
Undercarriage and Suspension | ||||
---|---|---|---|---|
Number of axles | 3 | |||
Wheelbase | 5300+1350 mm | 17′5″+4′6″ | ||
Front/rear overhang | 1470 mm / 1830 mm, 1470 mm / 1930 mm, 1470 mm / 2060 mm | 4′10″ / 6′1″, 4′10″ / 6′4″, 4′10″ / 6′10″ | ||
Approach / departure angle | 24 / 24, 24 / 22, 24 / 22 deg. |
Miscellaneous | ||||
---|---|---|---|---|
Seating capacity | 3, 2 | |||
Steering control | steering wheel |
Additional Information
Dump the way after unloading, optional environmental cover, optional swastika grid, Rygge trunk, optional three-door, five-door wagon, the cab ride corresponding quasi-three rated payload of 12375kg, Cab 2 corresponds to the rated load mass 12440kg, length dimensions correspondence: 9950 = 1470 +5300 +1350 +1830 (7200mm car length), 10050 = 1470 +5300 +1350 +1930 (7500mm car length), 10180 = 1470 +5300 +1350 +2060 (7800mm car length). material side guard rails for the 355L, bolt connection, the lower beam material for rear guard 16MnREL, bolt connection, cross section dimensions 135 × 85mm, ground clearance is 540mm, fuel consumption reporting correspondence between the value of the engine: 47.68 (CA6DL2-35E4U1, CA6DL2-33E4U1, CA6DL2-31E4U1, CA6DL2-29E4U1), 42.75 (CA6DL2-35E4U2, CA6DL2-33E4U2, CA6DL2-31E4U2, CA6DL2-29E4U2)