En
Cn
RuJingtan BT5118TZJDPP100-5C Drilling rig vehicle (#229)
Jingtan drilling rig vehicle BT5118TZJDPP100-5C (batch #229) based on EQ1141NBJ chassis is made in China by Beijing Prospecting Machinery Factory. The company is located in Beijing, in Beijing Municipality, China.
BT5118TZJDPP100-5C
Overview
| Model | BT5118TZJDPP100-5C |
| Brand Name | Jingtan |
| Bulletin | #229 |
| Type of vehicle | Drilling rig vehicle |
| Country of origin | China |
| Chassis | EQ1141NBJ |
Manufacturer Profile
| Manufacturer | Beijing Prospecting Machinery Factory |
| Brand | |
| Type of manufacturer | Machinery manufacturer |
| City | Beijing |
| Province (Region) | Beijing Municipality |
| Country | China |
| Number of vehicles* | 26 models (47 items total) |
| * A number of models manufactured by Beijing Prospecting Machinery Factory found in Auto-che.com vehicle database | |
Technical specifications
| # | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
|---|---|---|---|---|---|---|---|
| 1 | ISDe18030 / B19033 | 4500 / 5900 cc | 132 / 140 kW | ||||
| Performance | ||||
|---|---|---|---|---|
| Maximum speed | 90 km/h | 56 mph | ||
| Weights and Ground pressure | ||||
|---|---|---|---|---|
| Curb weight | 10260 kg | 10.3 t | 22,619 lbs | |
| Gross vehicle weight rating | 10650 kg | 10.7 t | 23,479 lbs | |
| Axle load distribution | 3300 kg / 7350 kg 3.3 t / 7.4 t 7,300 lbs / 16,204 lbs | |||
| Dimensions | ||||
|---|---|---|---|---|
| Overall length | 9110 mm | 29′11″ | ||
| Overall width | 2462 mm | 8′1″ | ||
| Overall height | 3800 mm | 12′6″ | ||
| Undercarriage and Suspension | ||||
|---|---|---|---|---|
| Number of axles | 2 | |||
| Wheelbase | 4500 mm | 14′10″ | ||
| Front overhang | 1245 mm | 4′2″ | ||
| Rear overhang | 1900 mm | 6′3″ | ||
| Angle of approach | 34° | |||
| Angle of departure | 17° | |||
| Miscellaneous | ||||
|---|---|---|---|---|
| Seating capacity | 3+3 | |||
| Steering control | steering wheel | |||
Additional Information
After the special device extension: 1465mm. Overrun.Side of the protective material used is made of Q235A, connections and bolted connections for the hinge, the lower protective coat installation area due to work restrictions, the vehicle can not install protective devices, according to the provisions of the exemption, the rear is equipped with hydraulic legs, height above ground fuel tank bracket is 450mm.