Shuangji AY3161AX1 Dump truck (#231)
Shuangji dump truck AY3161AX1 (batch #231) based on DFL3161AX1 chassis is made in China by Shiyan Anyuan Special Purpose Vehicle Co., Ltd. The company is located in Shiyan, in Hubei Province, China.
AY3161AX1
Overview
Model | AY3161AX1 |
Brand Name | Shuangji |
Bulletin | #231 |
Type of vehicle | Dump truck |
Country of origin | China |
Chassis | DFL3161AX1 |
Manufacturer Profile
Manufacturer | Shiyan Anyuan Special Purpose Vehicle Co., Ltd. |
Brand | |
Type of manufacturer | Special purpose vehicle manufacturer |
City | Shiyan |
Province (Region) | Hubei Province |
Country | China |
Number of vehicles* | 91 models (318 items total) |
* A number of models manufactured by Shiyan Anyuan Special Purpose Vehicle Co., Ltd. found in Auto-che.com vehicle database |
Technical specifications
# | Engine model | Engine displacement | Engine power | Engine manufacturer | |||
---|---|---|---|---|---|---|---|
1 | dCi340-30 ISLe34030 YC6M340-31 YC6M290-31 L29030 L34030 YC6M340-33 YC6M290-33 | 11120 8900 9839 9839 8900 8900 9839 9839 cc | 250 213 250 215 213 250 250 215 kW |
Performance | ||||
---|---|---|---|---|
Maximum speed | 85 km/h | 53 mph |
Capacity | ||||
---|---|---|---|---|
Quasi-total mass of trailer | 10000 kg | 10 t | 22,000 lbs | |
Load factor (the ratio of the payload of a vehicle to its weight) | 1.01 |
Weights and Ground pressure | ||||
---|---|---|---|---|
Curb weight | 7975 kg | 8 t | 17,582 lbs | |
Gross vehicle weight rating | 16100 kg | 16.1 t | 35,500 lbs | |
Axle load distribution | 4500 kg / 11600 kg (tandem axle) 4.5 t / 11.6 t (tandem axle) 9,900 lbs / 25,600 lbs (tandem axle) |
Dimensions | ||||
---|---|---|---|---|
Overall length | 8250 mm / 8450 mm / 8850 mm / 9050 mm | 27′1″ / 27′9″ / 29′1″ / 29′9″ | ||
Overall width | 2500 mm | 8′3″ | ||
Overall height | 3450 mm | 11′4″ |
Cargo body | ||||
---|---|---|---|---|
Cargo body length | 5600 mm / 5800 mm / 6200 mm / 6400 mm | 18′5″ / 19′1″ / 20′5″ / 21′0″ | ||
Cargo body width | 2260 mm | 7′5″ | ||
Cargo body height | 800 mm | 2′8″ |
Undercarriage and Suspension | ||||
---|---|---|---|---|
Number of axles | 3 | |||
Wheelbase | 3800+1350 mm, 4000+1350 mm | 12′6″+4′6″, 13′2″+4′6″ | ||
Front/rear overhang | 1500 mm / 1600 mm, 1500 mm / 1800 mm, 1500 mm / 2000 mm, 1500 mm / 2200 mm | 5′0″ / 5′3″, 5′0″ / 5′11″, 5′0″ / 6′7″, 5′0″ / 7′3″ | ||
Approach / departure angle | 30 / 22, 30 / 21, 30 / 20, 30 / 19 deg. |
Miscellaneous | ||||
---|---|---|---|---|
Seating capacity | 2, 3 | |||
Steering control | steering wheel |
Additional Information
1, dump mode after tilting. 2, the quality parameter variations due to changes caused by car length less than 3%, is negligible.Departure angle is also close to (degrees): 30/20, after the 30/19 front rear suspension also for (mm):. 1500/2000, 1500/2200 3, side protection and rear protection materials used for Q235, Bolted connections to section size rear underrun protection device (mm) of 100 × 110mm, the protective ground clearance: 430mm.